Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Kenworth Wiring issues

Discussion in 'Kenworth Forum' started by jrbeaves, Oct 6, 2016.

  1. Oct 6, 2016 #1
    jrbeaves

    jrbeaves Bobtail Member

    1
    0
    Oct 6, 2016
    0
    I have a 94 T600 Kenworth. Having some wiring issues. I put a new clutch pedal spring in and put everything back together and then my Jake brake didn't work. Is there something that i could have bumped? Also my dash lights are not working at all? Along with my head lights shut off randomly and then turn back on. Help
     
    jrbeaves, Oct 6, 2016
    jrbeaves, Oct 6, 2016
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oct 7, 2016 #2
    AModelCat

    AModelCat Road Train Member

    27,731
    145,309
    Jul 7, 2015
    Canuckistan
    0
    Jake brake is likely the clutch pedal switch. Check the microswitch on the pedal. Chances are it needs to be readjusted after you replaced the spring.

    As for the lights, if it only started after you had the dash opened up to fix the clutch pedal, look around in the dash for anything you could have accidentally unplugged. Possibly even some chaffed wires that you could have disturbed and caused a short.
     
    AModelCat, Oct 7, 2016
    AModelCat, Oct 7, 2016
    #2
  4. Oct 10, 2016 #3
    MJ1657

    MJ1657 Road Train Member

    7,521
    50,150
    Jan 28, 2012
    Isanti, MN
    0
    I has trouble with my headlights going on and off on my '00 W900. One of the grounds to the block was corroded.
     
    MJ1657, Oct 10, 2016
    MJ1657, Oct 10, 2016
    #3
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.