I do own the truck LOL. I'm not to good doing blue prints but will try to explain how i did it. I had to do 34 at LOWES parking lot an decided to make a cabinet. After few measurements i picked up 6 pieces of 1X12X48 pine plank. Asked lowes employee to cut 2 pieces 41and half inches, 2 pieces 21 and half 2 pieces 8.25 inches and i end up with 4 pieces of 16.5 long i used for middle section.
Made extra cabinet in cascadia
Discussion in 'Freightliner Forum' started by slavcha, Apr 2, 2016.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
TequilaSunrise, BigSky and Alberta trucker Thank this.
-
Total cost $45. Next i will make some shelf's for corners. And i did used a can of MINWAX PolyShades stain & polyurethane
-
Well done.
-
Are you saying you built that in the lowes parking lot? Mad respect for you my friend
redoctober83, Balakov100, TequilaSunrise and 1 other person Thank this. -
Yes, and 3 hours all it takes working SLOW.
-
I consider myself pertty recorcefull but I don't think I would have even attempted that project in a parking lot. Hats off!
-
How did you anchor the bottom (or sides) of the cabinet to the truck?
-
It fits tight it self, and 2 screws one in each bottom corner to bed support. It's haven't move in a week.
BigSky Thanks this. -
I forgot to mention the 2 pieces between top and bottom are 30 inches with equals door 22.5 + 8.5 inches part under door.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3