2016 670. Is there any way to easily change the marker interrupt switch to flash all of the lights (minus the headlights obviously) instead of just the clearance lamps. The trailers that I pull have the clearance lamps and side markers on the same circuit... So they don't blink when the switch is pressed. It makes the marker interrupt feature useless.
Marker interrupt
Discussion in 'Volvo Forum' started by flightwatch, Apr 13, 2016.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The easiest way I know of is to take apart your pig tail and switch the marker/parking lamp wires (phillips screw driver). My 2012 used 20amp fuses for both so hopefully that won't be an issue for you in 2016.
flightwatch Thanks this. -
Thanks. I'll give that a try.
-
-
No. I've been too busy. I did ask a ta tire changer and he said it was not very easy to do. Me and electrical wiring have never gotten along, so I'm a bit nervous to take it on... Especially if it not a very easy task.
silver dollar Thanks this. -
This may help you both:
Last edited: Apr 16, 2016
Reason for edit: better videojoealbergo, flightwatch and silver dollar Thank this. -
I think this all happens through the body computer which means it has to be programmed if it is even possible.
joealbergo and silver dollar Thank this. -
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2