idle it up to about 1500 or 1700. that will create about 2 or 3 lbs of boost. and spray all connections for leaks. a few little bubbles will show a leak. now think how bad that leak will be at full boost! the cac will have to be pressurized to find if it is leaking.
Need some help have run out of Brain! My 3406e 5EK 550hp is low on power!
Discussion in 'Freightliner Forum' started by brknwng, Jun 14, 2015.
Page 3 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
You could do it the professional way
http://www.northernfactory.com/UserFiles/Documents/Product/RW0090-11.pdfbrknwng Thanks this. -
You can buy,end caps,fittings and gauge at lowes or most any hardware store. Take a few minutes to assemble but it's a lot cheaper.
brknwng Thanks this. -
I'm home and she'll go in the shop tomorrow! I'lllet everyone know the ends results! Thanks to everyone for the input!
-
-
Check out weller radiator Wyoming Mi. They will probably beat most anybody's price,even with shipping for the cac.
Be sure to take a good look at your injector harness.brknwng Thanks this. -
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 3