Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Ratio question

Discussion in 'Experienced Truckers' Advice' started by NWAF, Jul 28, 2015.

Page 1 of 2
  1. Jul 28, 2015 #1
    NWAF

    NWAF Light Load Member

    74
    36
    Dec 12, 2014
    0
    Hello im planning on buying a new Volvo and i would like to know what would be my crusing rpm range at 70 mph, it has an ISX15 525HP 13 speed manual with 3.42 rears on 22.5s. Also is this a good all around combination to run on the west and east? Thanks all for the inputs
     
    Last edited: Jul 28, 2015
    NWAF, Jul 28, 2015
    NWAF, Jul 28, 2015
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jul 28, 2015 #2
    damutt

    damutt Road Train Member

    1,126
    370
    May 6, 2013
    0
    low pro or tall rubber?
     
    damutt, Jul 28, 2015
    damutt, Jul 28, 2015
    #2
  4. Jul 28, 2015 #3
    PackRatTDI

    PackRatTDI Licensed to Ill

    14,765
    22,561
    Jul 15, 2006
    El Chuco, Tejas
    0
    It will be roughly 1500 rpm on 295/75R22.5 tires and 1450 rpm on 11R22.5 tires.

    Simple equation to figure out.

    Road speed x gear ratio x rear end ratio x tire revs per mile / 60.

    Cummins recommends a 1400 rpm cruise speed at 65 mph with the isx and a max cruise rpm of 1600 rpm. So I'd say you're good. :)
     
    PackRatTDI, Jul 28, 2015
    PackRatTDI, Jul 28, 2015
    #3
    NWAF Thanks this.
  5. Jul 28, 2015 #4
    NWAF

    NWAF Light Load Member

    74
    36
    Dec 12, 2014
    0
    Tall
     
    NWAF, Jul 28, 2015
    NWAF, Jul 28, 2015
    #4
  7. Jul 28, 2015 #5
    NWAF

    NWAF Light Load Member

    74
    36
    Dec 12, 2014
    0
    Thanks for the information my friend, just spoke to one of my friends with almost identical setup just less horsepower and he says runs at 1430 rpm at 70mph
     
    NWAF, Jul 28, 2015
    NWAF, Jul 28, 2015
    #5
  8. Jul 29, 2015 #6
    mp4694330

    mp4694330 Road Train Member

    1,526
    1,453
    Aug 30, 2010
    Chicagoland
    0
    Why tall rubber if may I ask?
     
    mp4694330, Jul 29, 2015
    mp4694330, Jul 29, 2015
    #6
  9. Jul 29, 2015 #7
    NWAF

    NWAF Light Load Member

    74
    36
    Dec 12, 2014
    0
    They come stock maybe after wearing them out will switch to low pro
     
    NWAF, Jul 29, 2015
    NWAF, Jul 29, 2015
    #7
    mp4694330 Thanks this.
  10. Jul 30, 2015 #8
    KB3MMX

    KB3MMX Road Train Member

    3,057
    2,574
    Dec 29, 2014
    Orrstown, PA
    0
    You can spec LP 22.5, I just did one last Friday
     
    KB3MMX, Jul 30, 2015
    KB3MMX, Jul 30, 2015
    #8
  11. Jul 30, 2015 #9
    NWAF

    NWAF Light Load Member

    74
    36
    Dec 12, 2014
    0
    Yea but the one i want to get is already on the lot
     
    NWAF, Jul 30, 2015
    NWAF, Jul 30, 2015
    #9
  12. Jul 30, 2015 #10
    damutt

    damutt Road Train Member

    1,126
    370
    May 6, 2013
    0
    see if dealer will switch them out
     
    damutt, Jul 30, 2015
    damutt, Jul 30, 2015
    #10
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 2