Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Vibratech damper install on a Cat 'C' and C-15

Discussion in 'Trucks [ Eighteen Wheelers ]' started by bigguns, May 30, 2016.

  1. May 30, 2016 #1
    bigguns

    bigguns Road Train Member

    2,846
    6,848
    Jun 13, 2013
    Omega,GA
    0
    My new damper came with an additional plate. Does this plate go between the damper and pulley? What is the reason for the plate? Thanks Dan
     
    bigguns, May 30, 2016
    bigguns, May 30, 2016
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. May 30, 2016 #2
    BoxCarKidd

    BoxCarKidd Road Train Member

    4,188
    6,004
    Aug 26, 2014
    0
    I have seen some dampers that have a plate like that, maybe a 1/16" thick. They were directly under the bolt heads and work as a lock. I wound consult the mfg. Or use locktite, or go back as it was and use locktite, check the thicknesses. Don't want the bolts to bottom out because something is thinner.
     
    BoxCarKidd, May 30, 2016
    BoxCarKidd, May 30, 2016
    #2
    bigguns Thanks this.
  4. May 30, 2016 #3
    Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,723
    Jan 30, 2010
    keep stroking.
    0
    If your taking about the ring with the bolt holes in it, it goes on last before you stick the bolts in.
     
    Superhauler, May 30, 2016
    Superhauler, May 30, 2016
    #3
    Diesel Dave and bigguns Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.