I am not sure where, or if I can, post a question like this. I am trying to find out what the actual safe load could be for this size truck, as we have to move a large wine cellar (about 10,000 pounds) 200 miles. If the frame and tires can handle it, that would be great, but otherwise we will have to arrange for a second truck. The empty weight of the truck is 11,500 and the stated capacity on the website is 7600#.
Does anyone know the answer?
Thanks
Ken K
Maximum safe cargo weight for u-haul 26' truck?
Discussion in 'Trucking Industry Regulations' started by kdkrone, Jun 7, 2010.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Eek. I wouldn't exceed the weight they have listed. It's hard to tell what's "safe" without knowing the exact truck. Sure, the frame and tires can take it. However, can the brakes? Will you be able to stop that truck quickly if you need to? Will you be able to control it on hills? I wouldn't chance it.
-
Ken...... there's your answer. The safe capacity is what the truck is rated for.
Sure it may actually be more but...... not a good idea to exceed the rating.
........ Jim -
Yeah, plus they have vacuum brakes only, not air. Get 2 trucks and load forward only, keep the weight from past the back axle to a minimum.
-
Good point about the brakes! I had only been thinking about tires and frame. I will do the rest of the load in a trailer with brakes or in a second truck.
Thanks guys.
Ken K -
-
Gross Vehicle Weight Rating: Gross Combination Weight Rating
350. (a) "Gross vehicle weight rating" (GVWR) means the weight specified by the manufacturer as the loaded weight of a single vehicle.
(b) Gross combination weight rating (GCWR) means the weight specified by the manufacturer as the loaded weight of a combination or articulated vehicle. In the absence of a weight specified by the manufacturer, GCWR shall be determined by adding the GVWR of the power unit and the total unladen weight of the towed units and any load thereon.
So if you know the (GVWR) subtract the empty weight from it . This puts you in the ballpark if the truck is licensed to haul it. -
Actually its not a matter of licensing. Its a matter of weight rating.
Licensing is dealt with by the state. The rating is the rating. The licensed weight can be found on the registration..and is probably higher than the GVWR from the manufacturer.
Most states do not require a uhaul to go to a weigh station. In those states, the cops wouldn't care even if the bumper is dragging on the ground... States with weigh stations that say "all trucks enter", they have to enter. I dont remember which one but one state requires all rental cars to stop too. But states that say commercial vehicles enter, ....nope. Not if its just your personal belongings inside. Trucks over X tons? Depends on what you weigh.
Go to michigan. You'll find a LOT of semi tractors way beyond the combination weight rating from the manufacturer...since the weight limit in michigan is 160,000......
It wont be long before someone comes on here saying that he needs an MC# and DOT# and a class B to drive a uhaul. -
Vacuum brakes? Are you talking about hydraulic brakes with a vacuum brake booster like a car? Cause i thought uhauls had regular car brakes... -
Yeah, they do have "regular car brakes". I call them Vacuum, but I suppose hydraulic is correct. U-hauls are rated under 26001 lbs, which keeps them out of the CMV category. Ca. for instance, say all rental trucks must stop at scales.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2