I know that the price looks good but from experience, dropping the reman in takes as long as doing an in-frame and the core would not be accepted for the C16. C16's are so much in demand that it is had to find one now, reman or rebuildable core.
...raff
How much did your last in-frame cost?
Discussion in 'Trucks [ Eighteen Wheelers ]' started by Krooser, Sep 28, 2010.
Page 7 of 12
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I was thinking 30k is really high on price. Wonder if something else major was done that he is forgetting?
-
19,120 in frame overhaul engine
500 Towing coverage
3981 replace both turbos
-2140 In frame overhaul rebate
914.88 remove and install new engine oil cooler/new o-rings
235.93 Rebuild coolant diverter valve
889.63 Remove old air compressor/install new air compressor
210.58 Install new updated air compressor inlet line
340.14 Install new coolant hoses from engine to cab and sleeper
361.46 Rebuild engine brake
291.95 Remove and install new wiring harness internal componets
562.86 Remove and install air conditioner lines
753.78 Rebuild fan clutch
188 Flush engine cooling system(from fuel in the coolant)
301.35 misc charges(bolts, o-rings, gaskets, etc)
122.36 replace fuel supply and return lines
879.42 Remove and install new radiator pipes with stainless steel pipes
563.22 Remove and replace all belt tensioner's and pulleys
200.57 counter bore on #4
330.19 remove and install new alternator
93.14 Reseal engine oil filter base
210.03 New power steering hoses, new filter, filled with new fluid
1242.02 SD state tax
621.01 Sioux Falls city tax
30,773.52 Grand total
There is alot of new stuff under my hood. This is what I consider a proper in frame overhaul. If your going to do it then do it right. -
No offense intended.
Oh one other thing. Your proper o'haul wasn't done properly. You'll probably be back with a liner cracked or head gasket blown out. You should've had them do the other 5 holes when they did #4 counterbore.
Just for shiits and giggles you should've had them pull the front cover too. -
#4 was the only one that needed it. They said the other five were perfect. 112k since overhaul and no problems yet. Knock on wood...
Dominick253 Thanks this. -
-
3406B doing all of the work myself.
Inframe kit and gaskets, new rods and mains, rebuilt head, new injectors, turbo reused. Reseal front cover ( hate 3406B front covers, always leak behind #### compressor where two internal bolts are. new water pump.
Oil, Filters and coolant. 5600.00, 1/2 gallon Fireball, two cases of beer, lots of lies and good times spent with friends and co-workers.... pricelessSheepDog Thanks this. -
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 7 of 12