Hey guys I'm just about to go madd here, when I brake my last axles wheel on the right side locks up, I have swapped service lines to the other chamber to see if the problem followed and nothing. Then I swapped the slack adjuster and nothing.... I'm just about out of ideas, has anyone ever had this problem?
Thanks in advance
1 wheel locks up when breaking help!
Discussion in 'Trucks [ Eighteen Wheelers ]' started by thesvg, Feb 16, 2011.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
ABS sensor.
-
It's non abs
-
i would think it might be your relay valve /air valve on that axle--had the same happen to me--everytime i made a brake application over--about 15 lbs the wheel on trailer would lock up--only way to cure it was to release the air from the brakes--push buttons back in and away we go--and just try to brake very gently ---makes for a long trip to boston and back--but if you swapped service lines --should have moved to other side
-
abs sensor generally only tells the ecu what the rate is that the wheel is spinning--and compares it to the others to see if there is wheel spin happening
-
if the brakes are in adjustment,check the s-cam to make sure it hasnt rolled over.
-
Could be a warped drum?
-
-
-
and it is embarrasing as hell
heyyyy maybe try and adjust all the brakes--make sure they are all equal
it sounds like an air issue cause as soon as you take your foot off it rolls again--but like the other guy said a brake drum might do that as well
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4