fault codes 2006 cummins 435 isx
Discussion in 'Trucks [ Eighteen Wheelers ]' started by DHF, Mar 20, 2011.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Just had my truck into the KW dealer last month for a few things, including the PID 131 code.
The exhaust pressure sensor was the culprit there. Little brass piece of crap about the size of my thumb that costs about $100. -
I probably will have it hooked up to the diagnostic computer soon as the engine warn and work light can only be turned off via computer any way ... One place charges $125 to hook it it up but will apply that to any labor needed to replace a sensor. I had a brake light I found was not plugged in so when I cleaned connection and plugged it back in the 2nd fault PID 131_P went away on it's own.
Got a wiring diagram from cummins for 16 bucks and air plane wiring expert buddy will try to figure other stuff out soon...Thanks for input ? -
heavyd i agree !!!! 6 weeks ago i could see mid128 pid131 fmi2, and mid128 pdi146 fmi5 went to cummins they checked codes listing, some mechanic came out ,disconnected plug from the exhaust gas prreasure sensor and show me injside--->full of rust and green stain so i changed plug 25$$ including connectors, codes dissapeared
few days ago same codes popup plus mid128 sid232 fmi4 ,did same way,went yesterday to the same cummins location, same mechanic troubleshooted engine with a laptop ,found that now is the exhaust preassure sensor got bad , changed sensor and so far so good ,no codes and engine runs great good luckHeavyd Thanks this. -
I also get pid 131 active code, exhaust gas pressure incorrect. Was gonna change the exhaust pressure sensor. Where is it exactly on a 2007 ISX. Took truck to KW dealer on this code and they changed the intake manifold sensor, the one on the top. But still have same code come up. Thanks
-
It is on the right hand side near the right front corner of the rocker cover.
-
I found a picture;
Attached Files:
-
-
Thanks, gonna change the sensor this weekend.
-
Hey fella's i got an isx and it give's me a code of 136F09 and i can't find anything about any help would be greatly appreciated.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3