Woohoo I get to buy a set of injectors tomorrow for this ###### old N14. Oh well owned the truck for a year and this is the first problem.
---
- Sent from my iPhone using Tapatalk
Injectors!!
Discussion in 'Trucks [ Eighteen Wheelers ]' started by haulhand, May 10, 2012.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
How much is this going to cost? How did you know that you needed to replace the injectors?
-
I've replace injectors on my n14 1 at a time as they went bad. 6th 3 yrs ago and 1st 2 yrs ago.
I do them myself and its prtty easy -
-
-
Cummins has a deal if you buy 5 you get the 6th free. just installed a set last week in a cabover for a customer.
-
I'm glad this post came up because I'm about to replace an injector in my m11 and I am wondering after I remove the shaft will the injector be easy to remove or do I need a special tool to get it out of the hole? Any help would be much appreciated because I sure don't want to break something else!
-
Rebel, a manual for your m11 is a very valuable tool. It will give specs and show how to do it. You have to set the torque values throughout as you install. At least on my n14.
Ps. We were getting reman rx injectors for around $250 from volvo. No core as i had purchased a few from craigslist. Guys at our yard change injectors one a year. In 6 years he has a new set. Says it cushions the blow a little.
An overhead should be included at that price. -
Was just looking at a truck with an N14 in it. Local cummins shop quoted me $530 a piece for injectors.
-
i had 2400 in injectors for my old n14 they where not oem but aftermarket brand
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2