low fuel pressure

Discussion in 'Trucks [ Eighteen Wheelers ]' started by Superhauler, Sep 1, 2012.

  1. Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,723
    Jan 30, 2010
    keep stroking.
    0
    i'm stumped! my converted a-cert has low fuel pressure 70 to 80 lbs at idle and at high idle. changed trans pump and check valve and new suction lines from tanks. what am i'm missing. also shimed pump with no change.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Heavyd

    Heavyd Road Train Member

    7,625
    6,023
    Feb 4, 2009
    0
    What is it supposed to have?
     
  4. Real Deal

    Real Deal Medium Load Member

    468
    230
    May 29, 2012
    Saint George UT
    0
    Superhauler I have wondered that myself. I can't seem to make it the pressure change on my MRX pump.
     
  5. Real Deal

    Real Deal Medium Load Member

    468
    230
    May 29, 2012
    Saint George UT
    0
    MRS pump. Seems like my guy at the Cat House told me about a check valve recently that will hold to 105.Going to check with him this week.
     
  6. Real Deal

    Real Deal Medium Load Member

    468
    230
    May 29, 2012
    Saint George UT
    0
    Still trying to say mxs But this phone will not let it happen
     
  7. Gear head

    Gear head Medium Load Member

    532
    91
    Apr 1, 2012
    Belair,md
    0
    did you change the pressure regulator in secondary fuel filter housing.try pressure reg out of sdp serial engine they have a little higher fuel pressure. The fuel pressure is supposed to be 100 at 1400 rpm.
     
    Last edited: Sep 2, 2012
    EverLuc Thanks this.
  8. Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,723
    Jan 30, 2010
    keep stroking.
    0
    yeah changed it no difference. it used to go to 95 lbs but now it wont change. even replaced trans pump with shim and put suction line in a bucket of fuel to eleminate a restriction in fuel lines from tanks.
     
  9. Gear head

    Gear head Medium Load Member

    532
    91
    Apr 1, 2012
    Belair,md
    0
    How does it run is it posible that one of the poppet valves in one the inj. Are weak.
     
  10. Mr. Haney

    Mr. Haney Road Train Member

    2,693
    2,035
    Dec 17, 2008
    0
    The problem isn't an injector even if cylinder pressures entered the tip of the injector, the injection pressures would eventually rise above this and force the fuel out the tip. You have something obstructing fuel flow somewhere or a bad pump
     
  11. Gear head

    Gear head Medium Load Member

    532
    91
    Apr 1, 2012
    Belair,md
    0
    What about pick up tube opstruction.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.