It was workin fine yesterday n last night I changed out my dash lights for LEDs n then it hasnt worked since. It wont work for high idle either. Any ideas?
Cruise control quit - 98 FLD120
Discussion in 'Trucks [ Eighteen Wheelers ]' started by CbarM, Aug 20, 2013.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Always check the last thing you messed with first.
Make sure you have polarity correct and no accidental grounds...
Also... did you check to see if you need a ballast module with the led's?
Some do or not, depends on your lighting system/wiring...
Marybullhaulerswife Thanks this. -
-
The Freightliner I drove for my old employer had too many electrical gremlins to count.
-
If it is not related to the light you just changed another common problem on the fld 120's is the saftey switch on the clutch, it could either be bad or your clutchn is so far out of adjusment that it is not all the way at the top. While driving lift up on the clutch pedal with your left foot and see if the cruise works.
-
I actually did test out the clutch switch n my jake is workin normal. I replaced my dash lights with identical lights but went to red from blue so I wouldnt think that would cause any problems...
-
I have switched my lights back to the original ones and nothing still. Not sure what else to check. Is there a fuse somewhere for the cruise?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.