just wondering how this oil sample is. I can't get my scanner to work so I'll just write the results down for the last four sample I sent in(they are not for back to back driven miles). Engine is a pre DPF c15 ACERT
dates sampled: 5/10/2014 8/16/2013 4/28/2013
miles on engine: 508512, 498870,438456,417572
miles on oil- 9642,10444,10552,9786
make up added- zero, 1gal, 1gal, 1gal
ZN- 1046ppm Zn-1301 Zn-1612 Zn-1569
P- 989ppm P-1252 P-1571 P-1493
Ba- 0 Ba-0 Ba-0 Ba-0
Mg-660ppm Mg-739 Mg-342 Mg-324
Ca-1299ppm Ca-1658 Ca-3744 Ca-3529
Pb-0 Pb-0 Pb-0 Pb-0
Cu-1ppm Cu-1 Cu-0 Cu-3
Fe-15ppm Fe-7 Fe-10 Fe-12
Cr-0 Cr-0 Cr-0 Cr-0
Sn-0 Sn-0 Sn-0 Sn-0
Si-0 Si-0 Si-0 Si-0
Al-0 Al-0 AL-0 Al-1
Na-0 Na-0 Na-0 Na-0
Mo-28ppm Mo-38 Mo-0 Mo-0
Ni-0 Ni-0 Ni-0 Ni-0
Mn-0 Mn-0 Mn-0 Mn-0
Ag-0 Ag-0 Ag-0 Ag-0
Cd-0 Cd-0 Cd-0 Cd-0
Ti-0 Ti-0 Ti-0 Ti-0
V-0 V-0 V-0 V-0
soot 0.3 soot 0.2 soot-0.1 soot-0
oxidation 8.5 oxidation 10.2 oxidation-8.7 oxidation-2.2
nitration 13.7 nitration 15.1 nitration-13.6 nitration-4.6
ZDDP depletion-0 ZDDP 0 ZDDP-0 ZDDP-9.2
water < 0.3 same same same
fuel <1.0 same same same
coolant <0.1 same same same
viscosity 13.7 cSt@100c viscosity 14.0
ETA. I can't get the numbers separated across the screen but they go in order from last sample to first.
oil sample results
Discussion in 'Trucks [ Eighteen Wheelers ]' started by gunner76, Jul 19, 2014.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I am curious as well for your replies as I have a pre dpf c15 and am waiting for my ecopur to arrive, its a new learning curve for me
-
Are you sure you don't have them listed backwards? Your numbers are getting better! If they are in the right order I don't think you have anything to worry about. Last winter my aluminum all of a sudden spiked from a usual 2 or 3 to 23. I opted to do an overhaul and my rod bearings were flaking and ready to come apart. The only other number on mine that was higher than usual was lead, which was at 11 up from 4 or 5. So, in my opinion, I think you are good. How many miles, kilometers, hours on the engine? And do you know if it's ever been done?
-
they are in the correct order. I noticed the numbers are getting better which I thought was odd. The only number that has been getting worse is the Molybdenum levels. Also the iron levels jump around a bit. The engine has 508512 miles on it and I can't remember how many hours are on it. I bought the truck with 280,000 on it and there has been no internal work done to the engine. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.