Hi,
On my 97 3406e under the priming pump is a canister labled do not remove it is about 1.5" tall I have been told for years now replace it with an actual screw on filter.
Anyone have a part number that fits there? Parts counter man not sure if it is same as ones that come with filter from factory. Any issue running it in series with the factory Davco 380?
thanks,,,
3406e fuel filter
Discussion in 'Trucks [ Eighteen Wheelers ]' started by gafred99, Oct 22, 2014.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I should be the basic Cat secondaty filter, I don't know the Cat # off the top of my head, but all of ours use a Fleetguard FF5319, which they should be able to cross.
Then look at your Davco. If all you run now is a Davco, you probably have 2 micron element in there, you want a higher micron filter in the Davco if you'll be using a secondary. We don't have Davco's, so I can't help you with part #s, but all of our Cats run a 10 micron primary with a 2 micron secondary. -
The Davco filter has a detroit diesel 23521528, 16 micron ???
-
-
1R-0749 on that secondary filter if it is the same I use on a C15.
-
other than CAT filters , Baldwin, Fleetguard, WIX good for seconday?
-
I use CAT or Donaldson. Whichever I can get the best price on by the case. I guess it doesn't matter but those are the only ones I use.
-
The Davco is the best system you can get buy the 2 micron filter, or even the 7.
-
Using 2 micron filter not to restrictive?
-
fleetguard ff5369w fuel/water seperator
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2