Trucking Jobs New Driver Jobs Flatbed Jobs Tanker Jobs Refrigerated Jobs Auto Hauler Jobs Local / LTL Jobs
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 33
  1. #1
    Bobtail Member TommyToe's Avatar
    Member Since
    Sep 2007
    Location
    Scottsboro, Alabama
    Trucker?
    9 Years
    Age
    37
    Posts
    20
    Thanks
    0
    Thanked 1 Time in 1 Post

    USA opinions on glider kits

    hello everyone,
    i'm wondering if any of you have any opinion's or thoughts on the glider kits as a valid option....the kits i'm talking about are the one's where the whole truck is new, but it has a reman cat or detroit and a reman tranny.....

    any thoughts .......???????

  2. #2
    "Village Idiot" danc694u's Avatar
    Member Since
    May 2007
    Location
    Mississippi
    Trucker?
    23 Years
    Age
    53
    Posts
    9,955
    Thanks
    525
    Thanked: 3,637 Times

    Thumbs down

    Just my opinion...

    The last glider kit I was in, was the first and only "totalled truck" accident I was involved in.

    I don't know what the "specs" are on later models. But we had a recall on the ones we used. It seems they were having issues with frames cracking around the steering box area.

    A fact I discovered at 60 mph in Dayton, OH.

    You can't run fast enough to give me one......

  3. #3
    Medium Load Member 24valve puller's Avatar
    Member Since
    Sep 2007
    Location
    N.E. Oh
    Trucker?
    9 Years
    Age
    32
    Posts
    350
    Thanks
    2
    Thanked: 63 Times
    In my opinion this is the only way to go. A new truck with a older more reliable/fuel efficient engine

  4. #4
    Road Train Member latanea's Avatar
    Member Since
    Sep 2007
    Location
    cincinnati (sharonville)
    Trucker?
    11 Years
    Posts
    1,347
    Thanks
    85
    Thanked: 223 Times
    My Truckers Blog
    32

    ?

    who is marketing these?

    news to me

    \*shrug*


    kind of like a back dated kit car frame?


    a "new" truck with a recycled title?

  5. #5
    Bobtail Member TommyToe's Avatar
    Member Since
    Sep 2007
    Location
    Scottsboro, Alabama
    Trucker?
    9 Years
    Age
    37
    Posts
    20
    Thanks
    0
    Thanked 1 Time in 1 Post

    USA

    latanea,
    you can find them for sale in the "truck paper" that are free at pilot, etc.

    i saw one, a brand spankin new freightahaker coranado with a reman detroit and a reman 13 speed tranny for about $90,000

    it was so fancy i was drooling over the pictures......they also have pete 379's.....you could probably get any type of truck you wanted.....

    for the way they are spec 'd out, if you bought it totally new, you see the "listed" as retailing for about $130,000........too rich for my blood....

    later,
    toe

  6. #6
    Road Train Member broncrider's Avatar
    Member Since
    Mar 2007
    Location
    somewhere drinkin beer probaly.....
    Trucker?
    8 Years
    Age
    34
    Posts
    1,587
    Thanks
    1,895
    Thanked: 3,124 Times
    My Truckers Blog
    1
    they all make them...or at one time did....

    the premise behind them is a new truck with your used running gear....i.e...if you have a totaled 'shaker with good powertrain and axle's...they will set the guages and everything to work with the motor, tranny and rears...

    i think itd be a good deal except for the fact it's spendy to have someone transfer all your power train over...and when you put 'shaker parts on a pete...they will ( trust me ive seen it) look at you wierd when ordering parts

  7. #7
    "Village Idiot" danc694u's Avatar
    Member Since
    May 2007
    Location
    Mississippi
    Trucker?
    23 Years
    Age
    53
    Posts
    9,955
    Thanks
    525
    Thanked: 3,637 Times

    Thumbs down

    Quote Originally Posted by broncrider View Post
    they all make them...or at one time did....

    the premise behind them is a new truck with your used running gear....i.e...if you have a totaled 'shaker with good powertrain and axle's...they will set the guages and everything to work with the motor, tranny and rears...

    i think itd be a good deal except for the fact it's spendy to have someone transfer all your power train over...and when you put 'shaker parts on a pete...they will ( trust me ive seen it) look at you wierd when ordering parts

    Even wierder....being stopped at an Ohio scale, having your paperwork looked at while driving an International, then having to wait until the next morning for Mississippi State Offices to open up and PROVE that your title (which says Peterbuilt) is correct.

    Mississippi does not allow the re-titling of glider kits...or at least they didn't in the late 80's and early 90's.

    True Story.....

  8. #8
    World Citizen Etosha's Avatar
    Member Since
    Aug 2007
    Location
    Edmonton, AB
    Trucker?
    2 Years
    Age
    45
    Posts
    750
    Thanks
    54
    Thanked: 16 Times
    The truck in my avatar has a glider kit, because of a rollover accident before we acquired it. Only problem I found was getting parts for it, as Kenworths standard reply was 'Thats an invalid number'. Hence me sourcing parts from Freightliner, and never having another problem... Other than body parts etc of course.
    In Edmonton, Freightliner is open 24 hours and friendly, and Kenworth is only open till 1am. Another reason for using Freightliner...

  9. #9
    Bobtail Member TommyToe's Avatar
    Member Since
    Sep 2007
    Location
    Scottsboro, Alabama
    Trucker?
    9 Years
    Age
    37
    Posts
    20
    Thanks
    0
    Thanked 1 Time in 1 Post

    USA

    hey yall,
    the kits i'm talking about are all completey done...or you can even tell them the brand of motor you want, it's all included in the price.....i check out a company called fitzgerald in tenneessee that builds and sells them....

    only draw back i can really see is that you don't have a "new" motor warranty.......it's only 1 year or 100,000 miles, same for tranny........but i dont know any other specifics like the cab, air cond, etc, etc........

    the motor and tranny are arguably the most important components in a truck purchase.....therefore, i would be very cautious, or want more warranty....

    later, toe

  10. #10
    "Enemy of showers everywhere" wallbanger's Avatar
    Member Since
    Sep 2006
    Location
    In the bougy 'burbs of Detroit, MI
    Trucker?
    2 Years
    Age
    39
    Posts
    1,401
    Thanks
    29
    Thanked: 56 Times
    If the motor and tranny are remanned by the original manufacturing company (i.e. Detroit diesel and eaton) then there is a very good chance that you can but additional warranty coverage. I know for a fact that Det offers an additional warranty(for purchase) on their reman motors (the ones they reman in their facility for sure, possibly also for ones remanned at a Det diesel dealer).

Page 1 of 4 123 ... LastLast