edmonton alberta

how can i remove the nox settings from my 2000 3406E s/n 2ws

The 2WS files are all after the LOW NOX software came in to being........so there is no stock CAT file that will do this. You need to do a PDI or Bully Dog program.

so you can gain up to 100hp off fuel trim codes & injector codes? do you have to increase the hp when you increase the fuel? will there be more stress on the internals by turning the hp up to 550-600hp?

Can anyone tell me what software I need to get ahold of to change my fls fts settings?

Originally Posted by sandman1976

so you can gain up to 100hp off fuel trim codes & injector codes? do you have to increase the hp when you increase the fuel? will there be more stress on the internals by turning the hp up to 550-600hp?

You can gain over a 100 hp playing with these numbers in the ECM.

Yes, you increase hp when you increase the amount of fuel the engine can burn

The rotating internal parts of a 3406E 14.6L or a 6NZ C-15 are the same except for for the piston crown when compared to a 800Hp marine engine. The head gasket, spacer plate and head are the same as a C18 950hp Firetruck engine in the 6NZ C15 or later engines.

Uprating these engine to 800+ hp will not cause them to self-destruct. The biggest worry is the cooling system capable of getting rid of the extra heat the engine will produce. Will the aftercooler handle the extra boost, while cooling the intake air temperature down to exceptable levels.

I'm not saying you can't hurt an engine by turning the fuel to it, but a 600-700 hp engine doesn't have a shorter life span of a stock 550 if properly driven and serviced.

Originally Posted by Mikeg3797

Can anyone tell me what software I need to get ahold of to change my fls fts settings?

The FLS/FTS numbers are factory password protected in the ECM.

i had my fls fts settings changed in green castle pa help alittle