Trucking Jobs New Driver Jobs Flatbed Jobs Tanker Jobs Refrigerated Jobs Auto Hauler Jobs
Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    Light Load Member Turn3's Avatar
    Member Since
    Oct 2009
    Location
    Pacific, Missouri
    Trucker?
    5 Years
    Posts
    120
    Thanks
    42
    Thanked: 35 Times

    Peterbilt Warning Horn System?

    I am in the market for a used truck and today while looking over one that I am interested in I noticed something while doing the "brake bleed down" check. There was no warning horn when the light came on.

    I remember the first Pete I drove it had the same condition... someone had disconnected the warning horn. Off the top of my head I cannot remember exactly why but I think it has something to with it throwing a false signal/light.

    This truck, an '04 the same thing... taking it one step further I also notice one of the warning light is blacked out by what looks like black marker. I think I may know what it is. The trans oil temp gauge is pegged max 300+ with and without having a power supply. I wonder if this it the issue?

    Does anyone have any insight to the Peterbilt warning horn system? Or what if any system throws false warnings that need this type of action?

    Thanks for reading and your help.

  2. #2
    Heavy Load Member ampm wayne's Avatar
    Member Since
    Jan 2009
    Location
    bloomington,in
    Trucker?
    20 Years
    Age
    46
    Posts
    828
    Thanks
    1,077
    Thanked: 600 Times
    I drove Macks for several years. Some of my co-workers would disable the turn light beeper, That would also disable the low air buzzer.
    I also bet the black marker is covering an ABS warning light.

  3. #3
    Light Load Member Turn3's Avatar
    Member Since
    Oct 2009
    Location
    Pacific, Missouri
    Trucker?
    5 Years
    Posts
    120
    Thanks
    42
    Thanked: 35 Times
    Interesting thoughts on the ABS warning. I think I am going to have to look a little closer at this next time I see the truck.

  4. #4
    Road Train Member Peanut Butter's Avatar
    Member Since
    Nov 2007
    Location
    PO Dunk Idaho
    Trucker?
    5 Years
    Age
    52
    Posts
    1,321
    Thanks
    22
    Thanked: 409 Times
    newer peterbilt trucks the low air buzzer wont sound until you start the truck, i had a 2007 pete 379 that was this way, a oregon dot guy almost gave me a ticket for that till he found out it was legal that way.

  5. #5
    Trucker Geek txviking's Avatar
    Member Since
    Jul 2009
    Location
    Florida
    Trucker?
    EX-2 Years
    Age
    37
    Posts
    344
    Thanks
    70
    Thanked: 61 Times
    I don't know what model Peterbilt you're looking at, but on my Peterbilt 379, the low air alarm is a small speaker on the warning light assembly toward the top of the dashboard. If you take off that dashboard panel, the small circuit board containing the speaker will be plainly visible at the very top. It has a small wire (3 pins I think) going to a connector on the same circuit board as the speaker itself.

    Hope this helps!

  6. The Following 3 Users Say Thank You to txviking For This Useful Post:


  7. #6
    Light Load Member Turn3's Avatar
    Member Since
    Oct 2009
    Location
    Pacific, Missouri
    Trucker?
    5 Years
    Posts
    120
    Thanks
    42
    Thanked: 35 Times
    Quote Originally Posted by txviking View Post
    I don't know what model Peterbilt you're looking at, but on my Peterbilt 379, the low air alarm is a small speaker on the warning light assembly toward the top of the dashboard. If you take off that dashboard panel, the small circuit board containing the speaker will be plainly visible at the very top. It has a small wire (3 pins I think) going to a connector on the same circuit board as the speaker itself.

    Hope this helps!
    It does help thank you.

    I should have listed the truck and it is a 379 and the old Pete was a 378 and the speaker was in the general location you stated.

    Quote Originally Posted by Peanut Butter View Post
    newer peterbilt trucks the low air buzzer wont sound until you start the truck, i had a 2007 pete 379 that was this way, a oregon dot guy almost gave me a ticket for that till he found out it was legal that way.
    This truck does not have the horn with it running and last I remembered... we need to have it operational.

    That is what I am worrying about.. the horn not going off durning a DOT inspection.

  8. #7
    Light Load Member olblu362's Avatar
    Member Since
    Jan 2009
    Location
    rock springs , Wyoming
    Trucker?
    19 Years
    Age
    46
    Posts
    64
    Thanks
    2
    Thanked: 6 Times
    NICE KW I LOVE CABOVERS ALL OF THEM uhhh sorry did i say that out loud... you can pick those buzzers up pretty much anywherethere is a salvage yard i used to go by in fresno area on 99 cant remember where exactly but peterbilt or any parts house will have them so its just re-plug it in. or you could put a pressure switch set for whatever you want it at in the air tank and wire it to any kind of warning device.
    (train horn) hehehehehe

  9. The Following User Says Thank You to olblu362 For This Useful Post:


  10. #8
    Light Load Member Turn3's Avatar
    Member Since
    Oct 2009
    Location
    Pacific, Missouri
    Trucker?
    5 Years
    Posts
    120
    Thanks
    42
    Thanked: 35 Times
    Thanks... but I cannot take credit for the KW. It was my friends that he was restoring and in fact he still has a lot of parts just laying around. I told him about this forum and he should be joining soon.

    In regards to the horn I will be willing to bet they disconnected it and it works fine. And that there is something else that is the issue.

    But if not... thanks for the advice and hopefully it'll be an easy fix.

  11. #9
    Light Load Member
    Member Since
    Oct 2009
    Location
    Longmont, co
    Trucker?
    2 Years
    Posts
    63
    Thanks
    53
    Thanked: 21 Times
    You don't have to have both.
    You have to either a visual or a audible warning

    It very specifically says OR, not AND

    393.51 Warning signals, air pressure and vacuum gauges.
    (c) Air brakes. A commercial motor vehicle (regardless of the date of manufacture) equipped with service brakes activated by compressed air (air brakes) or a commercial motor vehicle towing a vehicle with service brakes activated by compressed air (air brakes) must be equipped with a pressure gauge and a warning signal. Trucks, truck tractors, and buses manufactured on or after March 1, 1975, must, at a minimum, have a pressure gauge and a warning signal which meets the requirements of FMVSS No. 121 (S5.1.4 for the pressure gauge and S5.1.5 for the warning signal) applicable to the vehicle on the date of manufacture of the vehicle. Power units to which FMVSS No. 571.121 was not applicable on the date of manufacture of the vehicle must be equipped with—
    (c)(1) A pressure gauge, visible to a person seated in the normal driving position, which indicates the air pressure (in kilopascals (kPa) or pounds per square inch (psi)) available for braking; and
    (c)(2) A warning signal that is audible or visible to a person in the normal driving position and provides a continuous warning to the driver whenever the air pressure in the service reservoir system is at 379 kPa (55 psi) and below, or one-half of the compressor governor cutout pressure, whichever is less.


    (my emphasis)

  12. The Following User Says Thank You to LoneCowboy For This Useful Post:


  13. #10
    Light Load Member Turn3's Avatar
    Member Since
    Oct 2009
    Location
    Pacific, Missouri
    Trucker?
    5 Years
    Posts
    120
    Thanks
    42
    Thanked: 35 Times
    LoneCowboy thanks for the regulation! This is exactly what I was looking for!

    I also found this information....

    S5.1.5 Warning signal. A signal, other than a pressure gauge, that gives a continuous warning to a person in the normal driving position when the ignition is in the “on” (”run”) position and the air pressure in the service reservoir system is below 60 psi. The signal shall be either visible within the driver’s forward field of view, or both audible and visible.

    So do I understand this correctly... if we have the gauge and the light then, then the light can be burnt out and the horn and gauge qualifies?

    -------

    Now I need to figure out what light is blacked out and which will probably lead me to the horn.

    Thank you again!
    Last edited by Turn3; 10.24.2009 at 06.31 PM. Reason:: confusion

Page 1 of 3 123 LastLast