Where do I get a HID conversion kit for a 2007 Volvo VN780
Discussion in 'Volvo Forum' started by mrktwiz, Apr 23, 2011.
Page 2 of 15
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
H11 XENON HID CONVERSION KIT SLIM BALLAST 35W 6000K (320717381683)
I puchased the kit listed above for my 2007 Volvo 670 this kit works great I love them. There are different numbered bulbs which will give you a different color light. Your 3000's will give you a yellow light up to 12,000 which will give you a blueish purple light. Your 6000 is right in the middle and gives you a white light. I would recommend colored due to the fact it could give some D.O.T. smuck a reason to horrace you. They are so simple to install. I did them myself. This is what I did and it made the job easy. I took the waring harnase appart took the four bolts that hold the headlight in and removed the whole assy. I removed the rear cover for the low beam light, removed the bulb inserted the new bulb installed the little ballast box inside the light box secured with one screw which was supplied the two wires that say go to the battery insert the ends into the orginal light wires. Secure these wires with electrical tape. Wal-la HID light. I didnt even have to cut any wires so if I need to send them back for warranty I'm covered. Thats one way they get you if you cut any of the wires warranty is void. Good luck if you have questions email me. -
Word of advice. If you are looking for the better view then get 4500k or 5000k lights. Stay away from anything above 5000k.
-
-
Dude, it's simple. You do not need to change anything, unless you don't want to have daytime running lights - some trucks have that option.
Buy your self zip-ties, sticky tap from the hardware store, rubbing alcohol - don't drink it, real liquor will work too. Rub the spot w/alcohol where the sticky-tap will go, let dry, place tap - sticky side down. Zip tie the wiring harness or loos wires to it. That way you'll have clean, professional, instalation.
Then, buy 3000k - and put them inside your driving lights.
However, I hope that you do not use them in addition to your lights during regular conditions, like some idiots do, because even OEM lights are blinding, if I can put it that way. Use them when conditions are right: darkish outside and it's raining, fog, pitch
Black and you're alone, snowing and dusk or later. Be
Wise, hid lights, if used right, will
Benefit you or you'll be the talk of the town, on the radio, like one guy was with green HID. Idiot- IMO.
Again, 4500k -5000k. Head lights, for maximum lumens.
3000k for the driving lights - will now be worked as fog lights.
And you have the power house of the set up.
Keep in mind, hid take close to a minute to get to their full output potential, it is not recommended to turn on and of-if you're signalling someone in front of you, use high / low. Finally, keep
You high beams as regular bulbs, unless you have a combo
Bulb- high/low. -
-
I don't recal listing any vendors here. I would never order something like an HID kit from the company that sell unwarranted or Chinese HID.
-
I was trying to quote Fireproof,
As for the HID light kit, 85% are made in china. Try to find one's made in USA or Japan, Good Luck. -
Japan is not the same as china.
-
I use China made ballasts with Hella bulbs. All work fine.
I wanna pay your attention that ballast start current is over 45A and then 3-5A, so use relays. Else you can easily damage LCM
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 15