Plug and played, I been runningthem for about 2 weeks now and I love them. Like someone else stated it takes about one to two minutes for them to get to full strength. I also ordered 2 sets of extra bulbs and I kept the orginal bulbs just in case I need them
Where do I get a HID conversion kit for a 2007 Volvo VN780
Discussion in 'Volvo Forum' started by mrktwiz, Apr 23, 2011.
Page 3 of 15
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The HID kit in question, will it work in the fog lights also. -
FYI: I've installed the 23mill candle power projector, by my door, like the 5-0 only bigger and better. Any idiot that drives with the lights not adjusted or uses fog/driving lights when the surcumstances are not calling for them, like driving at night, gets a
Taste of their own medicine and than some.
Check the integrity of your lights, if they are flimsy then they will not withstand the temperature that will be generated by the hid. Also, the outside cover, if not glass, might melt - if close enough. -
to use HID in fog lamps is illegal. Look at the fog lamp pattern and imagine the glare!
-
You still must go to Volvo and get the parameters for the low bem change so both HID lights to work, otherwise only one light will work, the other one will not light, and you will have an error message in the display on the dash that you have a short in on of the lights,#
Had to go to Volvo and get the parameters change, $250.00
Look for better light bulbs for the fog lights. -
Wiring harness,$75, eliminates the need of the steelership. Like I've said, quality and eBay do not go together, when it comes tO the hid, IMO . -
where can I find this wiring harness, ( who sells this, or can you directed me to a site that makes the wiring harness you are taking about). -
So the diagram of European HID installation. US version got no color marking of wires.
-
The Volvo dealer I bring my truck get service now and then know this, That's why they are charging me $250.00 to change the parameters for low beam.
Far as I know there is no plug and play solution. -
if you plug'n'play all works, but some LCMs throw codes. not all
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 15