$500 Overhead service @ Volvo OKC

Discussion in 'Volvo Forum' started by xiipercent, Sep 28, 2011.

  1. xiipercent

    xiipercent Medium Load Member

    456
    129
    Mar 19, 2007
    0
    Volvo d-12 engine.

    Seems steep. Claim is 4 hours labor.

    what will thye find that could push this north of $1000?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. dave26027

    dave26027 Road Train Member

    1,284
    804
    Sep 10, 2009
    Dallas, Texas
    0
    Chances are they're including a ton of systems checks and diagnostics that will show everything is working well.

    If it's not working well, you'll spend some bucks to fix it.
     
  4. Flightline

    Flightline Road Train Member

    2,343
    1,162
    Oct 1, 2011
    Almost There
    0
    Doesn't sound out of normal price. Just pray they do it right.
     
  5. rollin coal

    rollin coal Road Train Member

    12,466
    23,621
    Mar 29, 2008
    TN
    0
    Seems a little high. I believe a friend of mine with a VNL780 paid about $400 to have his done. I can get it done on mine for 3 hours labor, tax and everything - about $365. Not sure how much room there is once you raise the hood up on a volvo and "how much fun" it is to simply get the valve covers off, possibly a little more labor than on my truck.
     
  6. xiipercent

    xiipercent Medium Load Member

    456
    129
    Mar 19, 2007
    0
    Had the overhead done at Volvo denver. By the TA.

    $350. also had them do a PM and replace the carrier bearing I found had to much 'play' during my DOT annual inspection.

    As for the OH, i can't tell anydifference yet. I was hoping for better pulling power, mpg improvement-
    Thisrun should be a good test- We were dh out to LA from denver...and now headed east to indiana.
    7.5mpg on the way out--over the CO-UT I70 route.

    loaded with 28k. will avg 65-68 on cruise. hoping for 6.8mpg

    When I arrived in Cali, I stopped for a wash at the beacon , because the engine looked covered in Oil. found a head cover bolt was loose. No major loss of oil, just look splattered everywhere.

    Now, for the carrier bearing.... i, like others on the volvo forum, have this peculiar noise,vibration- that occurs at highway speeds when going downhill , power off- others have thought it's the airbag leveler...otheres the angle of the shaft - others the carrier bearing.
    well, with the carrier bearing replaced- my issues continues. I had a bag replaced and the level rod replaced about 4 months ago. at that time(volvo Boise) no mention was made about a faulty level valve. so , i'm kinda stumped, still.
     
  7. jakemcclure

    jakemcclure Bobtail Member

    34
    4
    Sep 23, 2011
    JAMESTOWN,ky
    0
    i have a driver that complains of this same vibration.. let me know if you find out what it is. i think his ride height is a little high myself, i'm going to adjust it down tomorrow and ask him again in a couple of weeks if he still notices it... if i'm not mistaken ride height is supposed to be 2.75" ?
     
  8. xiipercent

    xiipercent Medium Load Member

    456
    129
    Mar 19, 2007
    0
    Will do. I'm most likely taking it into Volvo Columbus in the morning. I've got the 'check engine fault' warning's poping up-

    with codes mid sid fmi
    128 146 13

    low oil warning-

    and this right after the PM, overhead service. killin me

    so, i'll ask about the ride height when i'm gettin this looked at.
     
  9. xiipercent

    xiipercent Medium Load Member

    456
    129
    Mar 19, 2007
    0
    Thanks to Pablo UA for the Volvo code sheet!

    however ...the codes I posted last night....

    indicate EGR, but I don't see fmi 13



    PS: how many times can I clear out the fault code on the lcd and what happens in the interim....Does the fault fix itself..."wishing on a star"
     
    Last edited: Oct 15, 2011
  10. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    FMI 13 is Out of calibration ore cant be calibrated
     
  11. v6killer

    v6killer Medium Load Member

    446
    121
    Dec 6, 2010
    ChicagoLand
    0
    I have same noise and vibration that you discribe, the dearler by me narrow it to the power divider on the rear end. At first I thought it was the I-shift trans going. They did put in an new air leveling system, because it had to much play in it. Volvo put an up dated part for the air leveling system. Four hoses down to two.
    After the part install 85% of noise and vibration is gone.
    I was going to put some motorkote in the rear end to see if that would help.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.