2007 Volvo 670 - Speedometer/Cruise Control Suddenly Stopped Working

Discussion in 'Volvo Forum' started by parhag, Mar 21, 2012.

  1. parhag

    parhag Bobtail Member

    8
    1
    Oct 20, 2011
    Chicago, Illinois
    0
    I was hauling a heavy load up a steep incline (I have a Volvo 465 Engine). When I got back on level ground, I noticed that BOTH my cruise control and speedometer had stopped working (I believe I had my cruise control "on" during the climb). I'm hoping that the speedometer just needs a new VSS sensor, but what could be causing my cruise control to stop working? I just had the oil changed this week as well as a hub cap kit installed on the right steer.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. 325TahoeSS

    325TahoeSS Light Load Member

    150
    71
    Feb 11, 2012
    Roma, Tx
    0
    Sounds like your speed sensor went out! It goes on your transmission!
     
    KB3MMX and parhag Thank this.
  4. parhag

    parhag Bobtail Member

    8
    1
    Oct 20, 2011
    Chicago, Illinois
    0
    Thanks buddy; that's what I'm thinking as well. I believe the part only costs @ $32. Is it something I can replace myself? BTW, smooth-looking truck my friend!!!
     
  5. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    it is bad VSS to VECU wiring.
     
  6. parhag

    parhag Bobtail Member

    8
    1
    Oct 20, 2011
    Chicago, Illinois
    0
    Thanks, that's what I've been hearing.
     
  7. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    really many volvos got two speed sensors, one for engine ECM, other for VECU, but with cummins engine only, Volvo engine gets speed data from VECU via J1939
     
  8. parhag

    parhag Bobtail Member

    8
    1
    Oct 20, 2011
    Chicago, Illinois
    0
    Had a new VSS Sensor put in yesterday. She's running like a champ now! Thanks!!!
     
  9. The Bulkmatic Grasshopper

    The Bulkmatic Grasshopper Bobtail Member

    40
    17
    Apr 4, 2012
    Kentucky
    0
    Cruise is linked to the VSS, so that's why that quit working

    Cruise works now that the sensor's been replaced, right?
     
    Last edited: Apr 4, 2012
  10. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    Two speed sensors - one for EECU, other for VECU. any unit throws speed data to J1708 and J1939. when both sensors are bad - no speedo and engine does not revs over 1200.

    if VECU VSS is bad - no cruise control.

    In EU as speed sourse Tachograph is used, it is connected to J1939 and all units get data from Tachograph
     
  11. The Bulkmatic Grasshopper

    The Bulkmatic Grasshopper Bobtail Member

    40
    17
    Apr 4, 2012
    Kentucky
    0
    My speedometer and cruise are out, as well. I get no revs past 1500rpm, although torque and power do not seem effected.

    I would have to get both speed sensors replaced? Where, exactly, are the sensors located for each CU?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.