I was having a little welding done on my truck when the welders cable that had a little fray in it came in contact with my chain box causing my truck to shut off. it started back up just fine, but i didnt notice till after he left that i now have a DATA LINK BROKEN message on my dash (codes:
mid 140 sid 250 fmi 12). also my speedometer and tachometer and qualcomm do not work either.
If anybody can help me with whats wrong and how to fix it that would be great... thanks
data link shock
Discussion in 'Volvo Forum' started by rdrsal, Mar 22, 2012.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Check the fuses.next time disconnect the neg batt cable.also the ecm connectors if possible
-
any ECU may be damaged and datalink is short. It is common damage with welding.
First of all, turn ign off and check for datalink (J1587/1708) resistance, must not be short! usually 60 ohm
After that unhook ECUs one by one till datalink start working, start with frame ABS unit.bullhaulerswife Thanks this. -
thanks to pablo for giving wondefull tips
-
Hi I’ve got a Volvo fm 13 litre 2010 model and its coming up on the dash with a data link fault and the engine will not start the fault code is mid 140 sid 250 appreciate any ideas thanks
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.