Volvo D13 2009 fault code

external engine protection input active.... usually bad wiring, it is Volvo

 

Might be a ground problem, start chasing wires!!

 

You fixed you problem,

 

hello guys i have problem with d13 09 i chance the gasket head ( for oil licks) after chance the engine NOT start , i chance another rebuilt head, the same the engine not start , i chance , start, timing sensor , fuses, harness, another ECM the engine no start , i check injector pulse energy , i chance 6 injector , i check timing fly wheel, and camshaft everthing is ok, but the engine NOT start try with gasoline , ether, nothing !!somebody can help me!!please !!is automatic transmission!!DPF engine !!!any help welcome or idea!!! thanx in advance

 

Sounds like your good at throwing parts at a problem....

What on earth would make trying it on gas seem like a good idea?!

Neutral safety switch? Maybe?

 

you know i chance o'rings piston because by compression but is dead complete,just drop white smog and i can see diesel in exaust head , any idea? j martell? thanx for replay!!!

 

j- martell doyou where is this safety switch? in i dont know if doyou have diagram about the cab to the ECM ?thank you in advance!!

 

No, I don't, my guess would be somewhere on the tranny(?) I have no idea, I don't have an auto, or a Volvo (depending on who you ask)...im just thinking out loud and hopefully pointing you in the right direction.....throwing money at it hasn't helped, maybe seek professional assistance.....