Let's just say it's easier/faster or so I thought to change a burned out fog light bulb on the 670 I drive.
Tried taking the front cover off with the 2 screws which did nothing. Are these adjustment screws?
There is no access from the back like a headlight. What's the secret?
Thanks
replacing fog light bulb 670
Discussion in 'Volvo Forum' started by bucksnort, Jan 17, 2014.
Page 1 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
2005+ You have to change the whole assembly. They are about $90 on ebay.
http://www.ebay.com/bhp/volvo-vnl-light -
flood Thanks this.
-
My problem is how do you get the assembly out of the bumper?
I loosened the two screws in the face of the foglight but it won't pull out of the bumper. Do I need to pry the housing out with a screwdriver after loosening the bolts?CondoCruiser Thanks this. -
-
Bolts are on inside, not back. And after you change bulb, make sure you adjust it. Those two bolts on the face of assembly.
-
I'll give it a shot. those allen head screws on the face take forever to back out. Either that or the nut holding them in is stripped and the screw just spins when you back them out. You'd think you back out the screws and the assembly will pop right out. It is a Volvo I guess
-
Those are adjusting screws.
-
Last edited: Jan 18, 2014
sully91, Smellfunny, lmar712 and 3 others Thank this. -
I'll take a closer look. something about searching for ways to take something apart kneeling in the snow with temps hovering around 0
CondoCruiser Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 3