Truck shut down......!

Discussion in 'Volvo Forum' started by jdmach77, Jul 5, 2014.

  1. jdmach77

    jdmach77 Light Load Member

    54
    9
    Jan 19, 2012
    New Jersey
    0
    I was driving on I-75 in Kentucky all of the sudden the truck lost power and engine stall. It doesn't want to turn on all I am getting is (Vehicle VCU needs maintenance) I tried to get a diagnostic on the engine ecm and communication fails.
    All I get is a code through the vcu it is the following.

    MID 144 PSID 200 FMI 9

    Any help would be appreciated.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. CrappieJunkie

    CrappieJunkie Wishin' I was fishin'

    3,962
    18,325
    Mar 9, 2014
    In a van down by the River.
    0
    Does it need a regen???
     
  4. jdmach77

    jdmach77 Light Load Member

    54
    9
    Jan 19, 2012
    New Jersey
    0
    Nop is a 2005 ved12d
     
  5. wonderdog24

    wonderdog24 Medium Load Member

    377
    127
    Mar 1, 2012
    Puyallup,Wa
    0
    Check your batteries..... Sounds like you might have lost power to the ecm..... Loose ground wire.....
     
  6. jdmach77

    jdmach77 Light Load Member

    54
    9
    Jan 19, 2012
    New Jersey
    0
    I also checked all the cables that goes from the battery and the fuse it all looks OK some rust but I cleaned up as good as I can and nothing. It won't turn on.
     
  7. morlandoemtp

    morlandoemtp Light Load Member

    185
    95
    Jul 5, 2014
    New York
    0
    Try checking your coolant levels, oil, and temp gauges if you haven't already.
     
  8. Grumppy

    Grumppy Trucker Forum STAFF Staff Member

    2,809
    9,036
    Dec 11, 2010
    West Monroe, La
    0
    OK, just to be clear,

    1) its not turning over?
    2) OR its turning over but just not starting?
    3) OR/& You turn the key on & get instrument indications & warning lights etc but nothing else?
     
  9. jdmach77

    jdmach77 Light Load Member

    54
    9
    Jan 19, 2012
    New Jersey
    0
    uploadfromtaptalk1404604279208.jpg this is the code
     
  10. jdmach77

    jdmach77 Light Load Member

    54
    9
    Jan 19, 2012
    New Jersey
    0
    It is turning over, not starting.....
     
  11. wonderdog24

    wonderdog24 Medium Load Member

    377
    127
    Mar 1, 2012
    Puyallup,Wa
    0
    You have a broken wire that powers the ecm... or it's grounding out on the frame somewhere.... Pull the power plug on the ecm n test it with your multimeter
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.