I have d 12 volvo, and in past 2 months I replaced injector #6,#1, then after 10000 miles injectors #3 and 4 , now is it possible that ,just today I got check engine ECU on ,and it says injector# 1,2,3, and 5 are bad , so if not what could be a problem??????
thank you
2007 volvo d 12 injectors
Discussion in 'Volvo Forum' started by Rilex, Aug 24, 2014.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
can u post me fault code list, cylinder ballancing test, fuel rate test?
-
mid 128 sid 1 fmi 12
injector #2 component failure,inactive,number of events 4
mid 128 sid 2 fmi 12
injector #3 component failure,inactive,number of events 5
mid 128 sid 3 fmi 12
injector #5 component failure,inactive,number of events 1
mid 128 sid 5 fmi 12
fuel rate is 6.1 now ,for balancing cylinders test,I am not sure where to look for that,
Thank you and have a nice day Sir. -
check wiring under valve cover for insolation damage and wiring harness for oil leak from cylinder head down to ECM
-
I just had to do this. Just as Pablo said, my injector harness that comes out the drivers side back of the engine head was leaking oIL and shirting it out. Injector 123 are in series and 456 in series. If there's oil leak then it's the very common to fail harness
-
Very good info
-
Need one injector, do them all at the same time and replace the wiring harness. It's better for your pocket long term.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.