Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

reverse light not working

Discussion in 'Volvo Forum' started by NathanMullin, Oct 10, 2014.

  1. Oct 10, 2014 #1
    NathanMullin

    NathanMullin Bobtail Member

    38
    7
    Sep 29, 2014
    Vancouver BC Canada
    0
    i got a 2011 670 and noticed the other day the reverse light not working. put new sensor in on the tranny and nothing. did volt test and found out there is no power going to the pig tail. checked the fuses under the dash and all are fine. is there anywhere else the fuse can be at?
     
    NathanMullin, Oct 10, 2014
    NathanMullin, Oct 10, 2014
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oct 10, 2014 #2
    xsetra

    xsetra Road Train Member

    4,923
    6,575
    Aug 21, 2011
    0
    Maybe your wire is broke.
     
    xsetra, Oct 10, 2014
    xsetra, Oct 10, 2014
    #2
  4. Oct 11, 2014 #3
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    first of all check LCM for fault codes, if no fault code - just check reverce switch, connector and wiring from tranny to cab, if u see LCM reverce light fault code - check taillamp and frame taillamp wiring for damage, usually in drives area
     
    Pablo-UA, Oct 11, 2014
    Pablo-UA, Oct 11, 2014
    #3
  5. Oct 12, 2014 #4
    NathanMullin

    NathanMullin Bobtail Member

    38
    7
    Sep 29, 2014
    Vancouver BC Canada
    0
    checked lcm for code. no codes. new sensor on tranny. going to trace the wiring to see if i have a break somewhere.
     
    NathanMullin, Oct 12, 2014
    NathanMullin, Oct 12, 2014
    #4
  7. Oct 16, 2014 #5
    NathanMullin

    NathanMullin Bobtail Member

    38
    7
    Sep 29, 2014
    Vancouver BC Canada
    0
    solved the problem. pig tail plug was corroded inside. clipped it off and spliced in a new one with nice new led backup light to match the brake lights.
     
    NathanMullin, Oct 16, 2014
    NathanMullin, Oct 16, 2014
    #5
  8. Oct 17, 2014 #6
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    Yep) cool, really it is good with electronic light control that u can know what is bad? switch circuit ore taillamp/trailer wiring!
     
    Pablo-UA, Oct 17, 2014
    Pablo-UA, Oct 17, 2014
    #6
  9. Apr 20, 2022 #7
    RoadRanger^^

    RoadRanger^^ Light Load Member

    217
    74
    Apr 17, 2018
    Columbus, OH
    0
    With Key in ON position, is there power in the reverse light or do i have to put it in reverse gear ? I took out the reverse no power in the wires. Could bad reverse switch cause this issue ?

    thank you!
     
    RoadRanger^^, Apr 20, 2022
    RoadRanger^^, Apr 20, 2022
    #7
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.