I am trying to find out how to prime the fuel (think fuel filter is clogging) the engine shut off on me just as I parked
Was reading thru manuals to prime the filter but how
It states keep pressing a button and some say prime with the electronic switch
Cant seem to find either one
prime switch D13 2015 ?
Discussion in 'Volvo Forum' started by United1996, Jan 27, 2015.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Well there is a bulb type switch on top of the filter. First remove the filter and fill it up with fuel, then install it back and push and release the bulb till it's hard to push it any more. Then turn the ignition key for about 10 seconds that will start your electric pump, then press the starter switch, if the engine doesn't start after 10 to 15 sec. then go and press the bulb again till it's hard to push, and again turn the ignition key wait 10 sec. and push the start button for about 10 to 15 seconds, you may need do do this few times before it starts.
mp4694330 Thanks this. -
I replaced the filted ,primed it with the nozzle (screw type thing, like bulb you said) filled with fuel both filter side and water separater
works smooth!
Not to bad being 1st day on the job trucking (seriously) 😆 -
Not bad at all good job.
-
The prime button is n the passenger side and is silver (aluminum). It looks like a solenoid
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.