Engine mount replacement cost?

Discussion in 'Volvo Forum' started by Helowrenchturn2, Mar 11, 2015.

  1. Helowrenchturn2

    Helowrenchturn2 Medium Load Member

    484
    139
    Apr 23, 2013
    0
    2007 780 ved12....anyone have this done lately??
     
    KB3MMX and mp4694330 Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. mp4694330

    mp4694330 Road Train Member

    1,526
    1,453
    Aug 30, 2010
    Chicagoland
    0
    Can I ask why You want replace?

    Own myself '01 610 with D12.

    Thanks.
     
  4. Helowrenchturn2

    Helowrenchturn2 Medium Load Member

    484
    139
    Apr 23, 2013
    0
    because they are bad and are causing a floor thump and vibration
     
    KB3MMX and mp4694330 Thank this.
  5. snowwy

    snowwy Road Train Member

    19,790
    12,333
    Jul 6, 2009
    0
    you can pop your hood. and watch the engine as you slowly let the clutch out. but not enough to kill the engine out and only do it briefly. see if the engine jumps.

    some trucks will actually break the fan shrouds and possibly cut the radiator and fan if the engine moves too much.
     
    KB3MMX and Helowrenchturn2 Thank this.
  6. Helowrenchturn2

    Helowrenchturn2 Medium Load Member

    484
    139
    Apr 23, 2013
    0
    Already did that. Also, I crawled under and looked at them with a flashlight. You can see the rubber is cracked, split and has shrunk. I know they are bad, just curious about replacement cost. Volvo quoted $2600 just for labor. I Can get all 3 mounts for about $300 but don't know if it's a job I want to attempt
     
  7. snowwy

    snowwy Road Train Member

    19,790
    12,333
    Jul 6, 2009
    0
    Your going to have to lift the engine some to get the mounts in place. They probably won't slide out and in and line right up.

    That should answer your question.
     
  8. ROADONE

    ROADONE Bobtail Member

    16
    5
    Mar 16, 2015
    0
    Hi, I have a vnl780 2005 and did the mounts last month at a smaller shop and saved a bunch. Dealer charges to what I've read over 2k$. Which is ridiculous if true. It's a tricky job just have to be careful, my mechanic lifted up engine by supporting evenly using the oil pan. Sounds crazy but he says he has done it like that for years. I was shocked myself. Lifted it up enough to swap. That's probably not the right way, I wonder how dealer does it?? 200$ labor plus mount I'll take that. Hope this helps
     
    KB3MMX and Helowrenchturn2 Thank this.
  9. Helowrenchturn2

    Helowrenchturn2 Medium Load Member

    484
    139
    Apr 23, 2013
    0
    That helps a lot! Where is the shop located??
     
  10. ROADONE

    ROADONE Bobtail Member

    16
    5
    Mar 16, 2015
    0
    No prob. It's a suburb of south Chicago here's the address name is MMCH truck repair
    6605 KITTY AVE
    Chicago Ridge IL‎ us, 60415
    United States
    1 (708) 822-4947
     
    Helowrenchturn2 Thanks this.
  11. ROADONE

    ROADONE Bobtail Member

    16
    5
    Mar 16, 2015
    0
    Smiley is the number eight, lol
     
    Helowrenchturn2 Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.