Has anyone successfully removed their sleeper curtains on a W900L or even a T660 with the Aerocab? I never use them as I have full window coverings and it just opens up the cab so much more.
W900L Sleeper curtain removal
Discussion in 'Kenworth Forum' started by TheLoadOut, Oct 5, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Should be relatively easy ...i looked at mine and thought same thing , but i dont have window coverings
TheLoadOut Thanks this. -
-
I wish it was easy.... you have to remove the closet hinge to remove the curtaincjb logistics and TheLoadOut Thank this. -
-
Please don't cut it out. The next owner will thank you. Kenworth is very proud of that curtain to the tune of $600+
w9l and TheLoadOut Thank this. -
Cummins_444 Thanks this.
-
The top of the curtain is the toughest part on the closet side. That shelf needs to come loose as well to get the final screw out. Not sure what you have on the right side (I had 2 closets) but there are 8 or 9 screws per side. It's definitely a PitA, but you might be able to sell them for $200-300 if they're still in good condition. -
-
The shelf should only require removing the one screw that's in line with the curtain. The gusset that runs the length of the curtain is 1" - 1½" wide. And, yes, the screws should be evenly spaced top to bottom.TheLoadOut Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.