It’s that time of year, went to switch to heat with no avail. Checked the bunk, same. Blows only cold air in both compartments.
pulled the seat, both doors and metal arms are in order but no actuation from the either motors when I try from the dash or bunk. I don’t feel like both actuator motors would crap at the same time, will the main dash control being faulty keep the bunk control from working? The fan in the bunk works, ac button just not the hot/cold dial.
Is there a breaker/fuse for the blend doors?
9400i ac/heat blend doors...help
Discussion in 'International Forum' started by Bigtruckdrivah, Oct 26, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Heavyd and Bigtruckdrivah Thank this.
-
Like mentioned, they share the same ground eventually. The white wires are grounds. Must have a bad ground because they powered and signaled separately.
stillwurkin Thanks this. -
White wires at the blender door motors are ground? I’ll check!
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.