Hey guys. Just purchased a 2013 wabash with a carrier. The box temperature is always 3 degrees lower than the set point . Regardless of what I put the set point at. What could be causing this issue. Is this something that could be rectified by bringing the unit and getting it serviced ? Thanks
Box temperature is always 3 degrees higher than setpoint
Discussion in 'Refrigerated Trucking Forum' started by Daddybakez, May 27, 2021.
Page 1 of 4
-
Attached Files:
truckdriver31 Thanks this. -
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Trucker61016, slow.rider and bzinger Thank this.
-
truckdriver31 Thanks this.
-
How are you verifying box temp?? Gauge could be off. Also is it on continuous or cycle ? Cycle will allow more temp swing
Trucker61016, slow.rider, bzinger and 1 other person Thank this. -
Trucker61016 and truckdriver31 Thank this.
-
Trucker61016, slow.rider and truckdriver31 Thank this.
-
Trucker61016 Thanks this.
-
rollin coal, truckdriver31 and bzinger Thank this.
-
Trucker61016 and truckdriver31 Thank this.
-
truckdriver31 and reeferwrencher Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4