Hello-
Fuse L8 (aftertreatment) keeps blowing whenever I hit a bump.
I have not been able to find any skinned, or broken wires, etc. This seems like the obvious, or most likely cause, unless I've overlooked something.
Any suggestions on where exactly I should be looking. Could the bump in the road (no pun intended!) be coincidence and it's actually a faulty component within the system overloading?
Thanks in advance for any ideas on this.
Should be simple, right? Not so much.
Aftertreatment Fuse Keeps Popping when I hit a bump.
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Lookunderthetruck, Oct 15, 2021.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Changed the wire harness to the pump. Now the fuse blows without hitting a bump.
Heavyd- you're an electrical whisperer as far as I'm concerned- any ideas on this fuse?
I don't have access to the Davie program so I'm going in a little (a lot) blind.Last edited: Oct 18, 2021
-
Please share last 8 of VIN
-
Last edited: Oct 18, 2021
Goodysnap Thanks this. -
Oops- I'll send it over to your email.
-
-
If my memory is correct- it turned out to be a faulty cannon plug on passenger side, behind the step.
I haven't been on here in years- I'm a little late responding. Hth!
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.