Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

2006 International 4300 DT466 - ICP valve removal

Discussion in 'International Forum' started by cprems, Oct 28, 2021.

Page 1 of 2
  1. Oct 28, 2021 #1
    cprems

    cprems Light Load Member

    97
    40
    Sep 17, 2018
    0
    What tool do you use to remove the ICP valve (sensor) I'm trying to find the correct tool without resorting to brute force and vice grips. Any help appreciated.
     
    cprems, Oct 28, 2021
    cprems, Oct 28, 2021
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oct 28, 2021 #2
    Flint1

    Flint1 Road Train Member

    1,107
    9,466
    Sep 4, 2019
    Alberta
    0
    IPR injection pressure regulator (on the back of the high pressure oil pump) or ICP injection control pressure sensor under the valve cover on the oil rail?

    IPR I just slide an open ended wrench on from the rear, they are not that tight. If you have an air compressor that may compliate things.
    ICP sensor just a normal norman wrench.
     
    Last edited: Oct 28, 2021
    Flint1, Oct 28, 2021
    Flint1, Oct 28, 2021
    #2
    cprems Thanks this.
  4. Oct 28, 2021 #3
    cprems

    cprems Light Load Member

    97
    40
    Sep 17, 2018
    0
    What sized wrench for the ICP sensor? Having a hard time finding one that'll fit in the tight space. I've already replaced the IPR and that was fairly simple and straight forward.
     
    cprems, Oct 28, 2021
    cprems, Oct 28, 2021
    #3
  5. Oct 28, 2021 #4
    Flint1

    Flint1 Road Train Member

    1,107
    9,466
    Sep 4, 2019
    Alberta
    0
    Is this a egr engine? This is a ICP sensor from a 2005 dt466. Its under the valve cover, screwed into the oil rail.
    20211028_201926.jpg 20211028_201903.jpg
     
    Flint1, Oct 28, 2021
    Flint1, Oct 28, 2021
    #4
    cprems Thanks this.
  7. Oct 28, 2021 #5
    ChuckMartel

    ChuckMartel Light Load Member

    160
    94
    Jan 22, 2021
    0
    Yes it’s a 15/16. I have an old wrench I cut down so it fits better.
     
    ChuckMartel, Oct 28, 2021
    ChuckMartel, Oct 28, 2021
    #5
    cprems Thanks this.
  8. Oct 29, 2021 #6
    cprems

    cprems Light Load Member

    97
    40
    Sep 17, 2018
    0
    Thanks Y'all. I really appreciate all the help.
     
    cprems, Oct 29, 2021
    cprems, Oct 29, 2021
    #6
    Flint1 Thanks this.
  9. Oct 29, 2021 #7
    cprems

    cprems Light Load Member

    97
    40
    Sep 17, 2018
    0
    I have an 06 EGR engine. Thanks for the pics. I appreciate it.
     
    cprems, Oct 29, 2021
    cprems, Oct 29, 2021
    #7
    Flint1 Thanks this.
  10. Oct 30, 2021 #8
    Inderjit

    Inderjit Medium Load Member

    624
    609
    Sep 17, 2017
    0
    I think you are referring to the IPR valve. I have used a 1 3/8" open end wrench but
    its a struggle some times and the discharge line has to be removed from the compressor.
    Snap-On makes a Socket for removing the IPR. It is a 1 3/8" 3/8" drive socket with a slot
    to clear the connector.
     
    Inderjit, Oct 30, 2021
    Inderjit, Oct 30, 2021
    #8
    cprems Thanks this.
  11. Oct 31, 2021 #9
    cprems

    cprems Light Load Member

    97
    40
    Sep 17, 2018
    0
    You helped me out with the IPR valve a few months back. I got that replaced and I really appreciate the help you gave me.
     
    cprems, Oct 31, 2021
    cprems, Oct 31, 2021
    #9
  12. Oct 31, 2021 #10
    Inderjit

    Inderjit Medium Load Member

    624
    609
    Sep 17, 2017
    0
    I'm glad I was able to help!!
     
    Inderjit, Oct 31, 2021
    Inderjit, Oct 31, 2021
    #10
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 2