I have a Stryker 497 hpc and for some reason while only in the RECEIVE mode it intermittently knocks out the satellite signal to my garmin gps.
If I transmit it has no negative effect at all.
It only shows up intermittently in the receive mode.
If I shut the radio off with in 3 or 4 seconds the signal returns.
I have tried it with3 different garmin gps all running at the same time and get the same results from all three?
Anyone have any ideas on how to fix this issue?
Stryker radio interference with garmin gps
Discussion in 'CB Radio Forum' started by Hulld, Nov 8, 2021.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Just out of the blue on receive it loses satellite signal?
It’s the oddest thing…
Shut the radio off and everything comes back on. -
Hulld Thanks this.
-
I guess I will have to pull the lighter fuse and see if the radio goes out… -
Pull the radio out enough to put a little dummy load on the radio, they put it together, turn it on and see what happens.
Hulld Thanks this. -
But it never does it when I key up the mic
only when on receive and intermittent?
My other thought is to increase the space between the windshield mounted gps and the radio. -
Hulld Thanks this.
-
Odd how gps goes bonkers on radio rec..Radio is basicly idle...
-
Hulld Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2