2 done..Forgot i had a fibreglass type sheathing to help protect them and what they mount near..
Thats two for my rear cab shocks so far..
How to keep bond straps in good shape
Discussion in 'CB Radio Forum' started by craig_sez, Jan 2, 2022.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Got frig all done but a mess on my kitchen table..
Wish i had a solder pot for this,it would be so much quicker.. -
-
Yeap thats all it is..You can make your own or buy them..
1" braided i got in a roll,bought some copper eyelets(lil to big but they will do the job)and i crimp,fill with solder then cover with the nylon sheathing and heat shrink on the ends..Attached Files:
-
-
Feels like it took forever and me arse is numb but i made 8 6" straps and 2 15"..Should be enough for some better bonding than what i have now...
Attached Files:
-
-
Nice job. It would be interesting to see your analyzers before and after the bonding numbers.
-
Planned to do it today but temps went from mid 40's down to half that and with the breeze half that again..Gonna have to wait till i can do it inside somewhere..
What i got there will do rear cab shocks,2 on each door and door to firewall..Not see an easy axcess for cab to chassie up front..
Im told im gettin a new trk in the next few months so im not gonna go nuts with it... -
-
-
Pretty much what im hopeing for as well..
Just odd how i cant get my 10k to tune,a few 7ft skip shooters and i have my 102 on a 10" riser and get it to tune to a llwer freq..
I even bought another 102 and went direct to my ant stud and same issue..So other than better bonding im stumped..
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2