Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

N14 ECM Plug

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by awarthogfan, Jun 22, 2022.

Page 1 of 3
  1. Jun 22, 2022 #1
    awarthogfan

    awarthogfan Bobtail Member

    15
    1
    Jun 21, 2022
    0
    I have a 1992 International Cabover with an N14 in it, tried several truck mechanics and all don’t have a plug to fit what’s on the truck from the ECM and say they haven’t seen the plug before, anyone know what to do about this
     
    awarthogfan, Jun 22, 2022
    awarthogfan, Jun 22, 2022
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jun 22, 2022 #2
    Big Road Skateboard

    Big Road Skateboard Road Train Member

    4,383
    20,824
    May 2, 2021
    0
    92 should be OBD II. A pic would help
     
    Big Road Skateboard, Jun 22, 2022
    Big Road Skateboard, Jun 22, 2022
    #2
    Coffey Thanks this.
  4. Jun 22, 2022 #3
    BoxCarKidd

    BoxCarKidd Road Train Member

    4,187
    6,003
    Aug 26, 2014
    0
    A little small round plug? Go to the junk yark and get a 9 pin with 6 inches of the harness or so. Wire it in. Sorry I did not keep a diagram on how I wired it.
     
    BoxCarKidd, Jun 22, 2022
    BoxCarKidd, Jun 22, 2022
    #3
    spsauerland Thanks this.
  5. Jun 22, 2022 #4
    awarthogfan

    awarthogfan Bobtail Member

    15
    1
    Jun 21, 2022
    0
    I can get a picture when I get home, it’s beside the ECM.
    Are you talking about the one in the cab? The mechanics I went too acted like that was nothing they have ever seen too, but then again it wasn’t an international dealer. I can get a picture of the in cab datalink plug if I need too.
     
    awarthogfan, Jun 22, 2022
    awarthogfan, Jun 22, 2022
    #4
  7. Jun 22, 2022 #5
    Big Road Skateboard

    Big Road Skateboard Road Train Member

    4,383
    20,824
    May 2, 2021
    0
    Scratch that
     
    Big Road Skateboard, Jun 22, 2022
    Big Road Skateboard, Jun 22, 2022
    #5
  8. Jun 22, 2022 #6
    awarthogfan

    awarthogfan Bobtail Member

    15
    1
    Jun 21, 2022
    0
    It’s a big plug, but was smaller than what they had with their computer, can’t remember how many pins it had. Had another plug that plugged into it also.
     
    awarthogfan, Jun 22, 2022
    awarthogfan, Jun 22, 2022
    #6
    Big Road Skateboard Thanks this.
  9. Jun 22, 2022 #7
    awarthogfan

    awarthogfan Bobtail Member

    15
    1
    Jun 21, 2022
    0
    awarthogfan, Jun 22, 2022
    awarthogfan, Jun 22, 2022
    #7
  10. Jun 22, 2022 #8
    BoxCarKidd

    BoxCarKidd Road Train Member

    4,187
    6,003
    Aug 26, 2014
    0
    The one in the cab is the one I was talking about. I believe ours was a a 82 or 8300 and it had switches on the dash. You will have to find another way to mount yours.
    It was pretty simple actually. Had to figure out which wires to hook up. Looked at things on line like 9 pin, N14 wiring etc.
    Maybe only takes 4. Battery power. Power with key. Ground. Then one or two to ecm. You will be in business.
     
    BoxCarKidd, Jun 22, 2022
    BoxCarKidd, Jun 22, 2022
    #8
    spsauerland Thanks this.
  11. Jun 22, 2022 #9
    pup

    pup Light Load Member

    252
    256
    Dec 3, 2011
    n.h.
    0
    The on engine data connector is located between the fuel pump & the block.
    Near the mounting flange. It's a 2 wire weatherpack
     
    pup, Jun 22, 2022
    pup, Jun 22, 2022
    #9
    spsauerland Thanks this.
  12. Jun 22, 2022 #10
    awarthogfan

    awarthogfan Bobtail Member

    15
    1
    Jun 21, 2022
    0
    Is this what your talking about?
     

    Attached Files:

    awarthogfan, Jun 22, 2022
    awarthogfan, Jun 22, 2022
    #10
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 3