So now I see what Pup was saying, I was looking for another round 9 pin type plug as that’s what I was told it would be. The weather pack above the fuel filter on mine has three pins for some reason
N14 ECM Plug
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by awarthogfan, Jun 22, 2022.
Page 3 of 3
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Every mechanic I brought it too had one of those Laptops and they had two plugs, both round and similar to the one beside my ECM, and said that’s all the plugs they had. They tried hooking to the one beside the ECM and said it was something they’ve never seen before and it should be above the ECM mounted, but like Pup said that’s only on Celect+ which I didn’t know and apparently they didn’t either
-
Found this back behind the pump in a weather pack too
Attached Files:
-
-
The weather pack connector in your last photo is the one you want. The 3 wire connector would go to an ambient air pressure sensor if the engine had one.
spsauerland and awarthogfan Thank this. -
I’ve found a guy who actually knows what he’s doing with the N14, he has the harness to hook up to the two pin datalink. And I have another question, the Speedo in the truck works but it’s never even close to what it should be, sometimes over and sometimes under. At times it can be 10 off and sometimes I’m rolling in 1st and it says 75. This would be a bad speed sensor right?
-
I use plenty of the Wix filters, but on N-14 I always thought they started and ran better with the FF1000 with the standpipe in it.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 3