I’m all set , years ago had the ground from date port to ecm run thru a spare switch….
with switch off no unwanted communication with the ecm ……. Unless you want to pull the wiring harness off the ecm and tap in directly…….
Safety groups call for 60 mph speed limiters on trucks
Discussion in 'Trucking Industry Regulations' started by kemosabi49, Jul 16, 2022.
Page 7 of 16
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
There's going to be so much road rage. A lot more accidents.
-
nredfor88, Siinman, Another Canadian driver and 1 other person Thank this.
-
The technology has been around since about 2015. I’m sure if it was “illegal” the lawyers would’ve had a field day with it by now. They must figure a computer is better and more reliable at selecting the needed gear from neutral than a person would be moving a stick. Any input from the driver at all and the auto goes back in gear right away. -
Let's be honest, we all know safety takes a backseat to fuel mileage, just imagine the lawyers arguing back and forth whether saving that .001 mph to save the entire world is more or less beneficial than keeping the truck in gear going downhill. -
-
-
-
-
68 on cruise control.
72 on the pedal.
90 on a good downhill in gear.
I haven't tried downhill in neutral. I'm more used to manuals and that was a big no-no.W923 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 7 of 16