What if it Snows?

Only a size 10.5 .. Think the camera makes them look big

 

I sprayed it out with brake cleaner then let it dry and use a soft brush to clean all yhe soot out. dumped all the particles and crap on the ground and the wind carried it westward towards california.. Just trying to do my part

 

Try gently but firmly...
Clamp vise grips on the top part of chain close to the sprocket. Turn nut left, v/grips will jam and hold you .
If no go, clamp on lower part of chain and turn right, v/grips will jam and hold you.

If neither will break it loose... and another nut is obtainable. Rig as above(with a helper) and use a sharp cold chisel against nut to jar it loose. Sometimes shock is more effective than torque. Shade tree methods....

 

Didn’t have very much chrome on it.

 

That is not looking to promising at all.Is that case broken? Or is it just a plate behind sprocket the holds the the countershaft bearing.

 

Just sub a shot for pill
Oh @Dave_in_AZ

 

Axle or your neck, not completely clear from you post?

 

I’m goin way out on a limb here, but I predict before this is finished, there are going to be some expletives shouted out, that this machine has never been called yet. The motorcycle that is.