Hello, if this is not the right group, could someone please tell me the correct one. Ok so here is my question, my belly dump was working great on Friday, I went to use it the next monday and I noticed the clam shell was open a bit, 2-3 inches and I could not get the clam shell to open or close. Any ideas on where to start looking for the problem?
Belly dump trouble
Discussion in 'Tanker, Bulk and Dump Trucking Forum' started by stdkjoe, Oct 8, 2022.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Air operates the rams on the gates. Enough air pressure?
MartinFromBC and AModelCat Thank this. -
Short store. Had a load of 3/4 minus in a belly. Going down a surface street at the edge of town and blew a air line on the gate. This guy got a load of gravel on his driveway for free.
Hammer166 Thanks this. -
Probably electrical problem. Get the test light out and make sure you are getting power to solenoid
Caterpillar Cowboy Thanks this. -
Thank you for all the input, the screen in the supply air valve on the trailer was completely plugged
Itsbrokeagain, singlescrewshaker, okiedokie and 2 others Thank this. -
singlescrewshaker and MartinFromBC Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.