Suppport Thread for the TND 500, TND 700 or future Rand McNally products.

Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Mark Kling, Apr 16, 2010.

Thread Status:
Not open for further replies.
  1. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,216
    Sep 23, 2007
    Statesville, NC
    0
    Not at this time, but I will pass this suggestion on.

    Thanks,
    Mark
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. marshull

    marshull Bobtail Member

    16
    8
    Jul 10, 2011
    Charlotte, NC
    0
    Well dang. My 700 just died on me. It charges up, I can see the light go from red to green, but the power does nothing. I also tried the reset button. Tried plugging in to my laptop hoping it would boot it up but no go. Any ideas? I have unplugged and will let it sit for the day and charge it back up tomorrow. Anything else that might work?
     
  4. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,216
    Sep 23, 2007
    Statesville, NC
    0
    12 hours unplugged/3 hours charged on AC, then power on, you might have to press the reset also on the powerup.

    Let me know if you have any more issues with this.

    Thanks,
    Mark
     
  5. jmroadhog

    jmroadhog Medium Load Member

    443
    193
    Apr 26, 2012
    Grand Forks BC
    0
    Mark
    Ran into this problem last week. Had a trip to Tempe AZ last week from Grand Forks BC.crossing at Osoyoos BC. Gps routed me down into Idaho I84 ok but wanted me to go through SLC down I15 over I70 and down 89 through Flagstaff and I17 through Phoenix.
    The route I wanted,which also turns out to be faster and shorter was US 93 out of Twin Falls ID. It would not let me route that way unless I put a VIA in at Love's truck stop at the junction of I15&US 93 and also one at Wickenburg AZ. For some reason it would not follow US 93 all the way down to
    Tempe AZ.
    On the return trip it still wouldn't follow US 93 back to Vegas.wanted me to follow I10 to the 95 adding 1hr to the trip and many extra miles.
    Is there a reason why it won't route on US 93 in AZ unless u add a via even though it's faster and shorter.
    For anyone knowing the layout of the country this would not b a problem but if u depended on the Gps it would add uneeded time and extra miles to the trip.

    Thanks
    John
     
  6. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,216
    Sep 23, 2007
    Statesville, NC
    0
    Main screen/preferences/route/freeways - what setting do you have?

    allow all - should route on US routes
    Avoid freeways - will keep you for the most part on side roads
    Prefer freeways - will keep you on freeways only till destination
    avoid small roads - usually small roads in around/in cities.

    Or

    Could be a restriction.

    I will have it checked out.

    Thanks,
    mark
     
  7. jmroadhog

    jmroadhog Medium Load Member

    443
    193
    Apr 26, 2012
    Grand Forks BC
    0
    Set at allow all.
     
    Mark Kling Thanks this.
  8. jet460

    jet460 Heavy Load Member

    760
    379
    Oct 8, 2011
    Modesto, Ca
    0
    Posted a while ago about my 710 that froze and died after 2 months.
    Sent it in for warranty and it came back worse.
    The screen flashes dark/light in unison with the verbal instructions, it freezes up, the charger wire gets hot where it plugs into the unit, and the battery is stone cold dead. Will not run unplugged. I am sending it back and demanding a new one or a refund.

    In the mean time, I got a 510 to get me by.
    It has issues right out of the box.
    It is insanely slow to respond to commands, freezes up, and sometimes it says "no truck legal rout bla bla bla " and erases my rout, even when I know the rout is legal.

    I have run the RM Dock diagnostics on it several times and it always has corrupt files.

    These things are junk.
    My next GPS will be a Cobra.
     
  9. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,216
    Sep 23, 2007
    Statesville, NC
    0
    What route are you trying to run?

    Thanks,
    mark
     
  10. jet460

    jet460 Heavy Load Member

    760
    379
    Oct 8, 2011
    Modesto, Ca
    0
    I am currently running I5 south thru Cal. Selected a truck stop in Corning, and the unit crashed. Said the rout was not truck legal. It's right off the hwy. Ran the diagnostics/repair and now it works. It does this all the time. It takes over a minute to respond to selections too. very annoying.
     
  11. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,216
    Sep 23, 2007
    Statesville, NC
    0
    Even though truck stops are off the freeway there may be a restriction in place on one of the ramps or main street off the ramp. Restrictions sometimes are beyond the truck stop, but the whole segment of that road is tagged wrong. Your 510 is on a prior mapset that what I am running and I route fine to the TA.

    In order to duplicate your issue I would need the start/stop locations and which TS you were routing to.

    D/R - when you connect to the Dock for the first time it copies all the files except the Map files (DCA) to your C:\. The when you run D/R it compares them to what is on your TND. If you had gotten a bad download to your C:\ then you basically are comparing a bad file to a bad file.

    You can delete this Cache folder and uninstall the Dock, then reinstall the Dock again to start the new download of files for the Cache folder. It is suggested you be on a high speed network and not an Aircard.

    You may also have a corrupted DCA file which D/R will not fix.

    I can remote into your laptop to do the above, but you would need to be on a high speed network. Even 4G may be a little slow for the re-installment of the files.

    Whenever you turn on the TND nothing is in memory. Each time you go to a new screen it has to load into memory. Once you have been on a screen the response will be faster.

    If you leave the TND on for several days your memory could be full and it will require a reboot of the TND to clear out the memory.

    I hope this helps.

    Thanks,
    Mark
     
    jmroadhog Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Thread Status:
    Not open for further replies.