Swift gets back into carhauling.

Discussion in 'Car Hauler and Auto Carrier Trucking Forum' started by Hammer166, Feb 13, 2014.

  1. Hammer166

    Hammer166 Crusty Information Officer

    6,945
    23,882
    Aug 18, 2007
    ~8600+' and loving it!
    0
    I don't think this is what corporate had in mind!

    1617388_805576079458984_113621017_o.jpg

    I bet that driver thought he was going to end up swimming.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Richter

    Richter Road Train Member

    4,090
    1,696
    Feb 13, 2012
    Philadelphia Pa
    0
    Im surprised the car carrier designed for a 3000 pound car held the 12,000 pounds steers without failure. Someone wasn't paying attention
     
  4. Hammer166

    Hammer166 Crusty Information Officer

    6,945
    23,882
    Aug 18, 2007
    ~8600+' and loving it!
    0
    Yeah, I'm guessing the other side of the trailer isn't quite as straight as this side. :biggrin_2559: You can bet catching it the way he did the corner of the trailer likely cleaned off the bottom of the cooling package as it rode up, too.
     
  5. 05 FreightShaker

    05 FreightShaker Light Load Member

    265
    30
    Jan 20, 2013
    Houston
    0
    Looks that was a hard hit...think it kinda pushed the axle back a little on the swift? Where and when did this happen?
     
  6. Hammer166

    Hammer166 Crusty Information Officer

    6,945
    23,882
    Aug 18, 2007
    ~8600+' and loving it!
    0
    [​IMG]
    One of the other pics shows a turbocharger sitting against the jersey wall. :biggrin_2555:
     
    FloTheWaitress Thanks this.
  7. SHO-TYME

    SHO-TYME Road Train Member

    3,425
    3,177
    Apr 20, 2011
    Dahlonega, GA
    0
    You can tell how good the car hauler had the cars strapped down.........
     
    Hammer166 Thanks this.
  8. 05 FreightShaker

    05 FreightShaker Light Load Member

    265
    30
    Jan 20, 2013
    Houston
    0
    Hammer166 Thanks this.
  9. Hammer166

    Hammer166 Crusty Information Officer

    6,945
    23,882
    Aug 18, 2007
    ~8600+' and loving it!
    0
    Yeah, I didn't notice until I found that other pic that he'd lasso-tied that pickup. And the hook is still attached to the ratchet end. hmmmmm
     
    Last edited: Feb 13, 2014
  10. 05 FreightShaker

    05 FreightShaker Light Load Member

    265
    30
    Jan 20, 2013
    Houston
    0
    I wondered the same thing...if that tanker had leaked though, all hell would break loose. That car-hauler kissed ### literally :biggrin_2559:
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.