I hate Peoplenet, where are you parked and recipes thread
Discussion in 'Experienced Truckers' Advice' started by TruckDuo, Feb 17, 2015.
- Thread Status:
- Not open for further replies.
Page 1666 of 3049
-
allniter, drdesl, chopper103in and 2 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
And just when I figured out that sliding the tires back puts more weight on the tandems...
...more...uhh...pressing matters may have arisen during vacation. :O
But I'll have tales about all that later. Started off this morning with 1,200 unread posts. Got 500 more to go. Only after I get finished. Stay tuned for the real show after these commercial messages?
@Blu_Ogre
Got anything you'd like to share on your "Save the Newbs" campaign?
It's more cake than crab!
drdesl, HeWhoMustNotBeNamed, Ssssnake and 2 others Thank this. -
I am so taking the 840 today!Vilhiem, ncmickey, chopper103in and 1 other person Thank this. -
Reminds me of the 405 during the US opentsavory Thanks this. -
It's raining in Nashville to boot.
Vilhiem and chopper103in Thank this. -
-
Sure glad you in crashville, not me. between the rain and road conditions I'll sit at the house. LOL
-
Yes, he's got it. Lol
drdesl, HeWhoMustNotBeNamed, Vilhiem and 1 other person Thank this. -
Nice @PackRatTDI bring the rain to crash ville. I'm heading there after I stop in Oklahoma City
@TruckDuo lots of loads I can't keep up.
Why are they asking. "You speak English" -
Lingering longer than I wanted to at one of @'olhand 's haunts (Tommy Brook). I got my own coffee maker so don't need no DD, so am across the street at the Love's. Lucy likes the bigger lawn over here to poop on, so that sealed the deal. Power was out at the whole intersection for a couple hours after I got here. As-if this interchange needs help to be more of a charlie foxtrot. The cb was alive with chatter about it and the megas kept rolling in, waiting at the pumps and the scale for a miracle or something.
Hasn't been a total waste. I had a few minor things I've needed a little time to get done on the truck and did that. The hood alignment pin was almost full on McGyver time. I have tools on the truck, just not everything I'd have at home. I forgot the old one might be rusted. And crumbling apart. Worked a little miracle with doubled up wrenches for leverage and some mack daddy vice grips. Managed to get the new one in without breaking two other parts and five trips to a hardware store.
The other two were easy. Re-velcroed my prepass so no more gymnastics while driving, trying to reach it down on the dash to stick it back up where the glue got all mushy and loose. I also got another binary switch for the a/c and finally put that in and removed the scotch lock splice I shorted the harness with. I knew if I kept putting that off, I'd soon have a $20 freon leak turn into $1,000 worth of compressor and condenser when my luck ran out. Seems to be working, but it was an intermittent issue that will have to test out more than just in the parking lot.
If you're coming thru, just park on the scale and holla. I'll be right over LOL.drdesl, HeWhoMustNotBeNamed and TruckDuo Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1666 of 3049
- Thread Status:
- Not open for further replies.