Picking my own freight baby! My journey to & of being on Schneider choice, the Adventure & Numbers!

Not sure I understand your question. Please explain?

 

What psi would you say 34k is on the drives? I've always been told 60psi=34k.

 

In my experience, those gauges give you a 'whereabouts' not an exact and a lot of them are different

 

The VTL trucks I have been assigned dont have that feature. Brake air only.

 

It all depends, my gage @ 75 lbs is 34000. Had a different truck @ 60 lbs = 34000

 

In the truck I drive I calibrate it by weighing the truck with full tanks and an empty trailer, then I scale it out after I have adjusted the tandems using the gage (our trucks have fixed 5th wheels) and then I just audit from there to make sure it's still accurate. I'm usually able to get it within a hole, if the loads close I always scale

 

I have a Peterbilt. 68 psi is 34k.

 

Same in my 579 Pete

 

Oklahoma border to Emporia is $19 for 5 axles