mercer transportation

Discussion in 'Mercer' started by kw12, Jul 21, 2012.

  1. mtoo

    mtoo Road Train Member

    1,935
    4,500
    Jan 15, 2011
    Retired on bended knee
    0
    I bet those old timers regret doing that!!! LOL :)
     
    Razorwyr and spyder7723 Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. MACK E-6

    MACK E-6 Moderator Staff Member

    48,755
    225,207
    Sep 19, 2005
    Baltimore, MD
    0
    I'd definitely like to see a picture of that situation.
     
    Highway Sailor Thanks this.
  4. spyder7723

    spyder7723 Road Train Member

    15,470
    25,061
    Mar 31, 2013
    sarasota, fl
    0

    You are so full of ####. You've been here just a few months longer than me. Perhaps a year at most. truck stop scanning has been common for over a freaking decade. If you had said they made the switch in 1995 before every single loves pilot flying j ta and petro had installed transflo then maybe you might have a leg to stand on.

    If your gonna tell tales make it believable. You can't bs a guy with a phd in bs.

    Oh and fyi. The option to mail your bills in is still there. They even supply pre addressed envelopes for it.

    You are a relatively smart guy, and you've been pretty successful here at mercer and federally know what you are talking about. But here in the last couple weeks you've done nothing but make yourself look like a no everything jerkoff. No different than the guy sitting at the truck stop counter spouting off about a carrier he has never even been leased to.

    Actually it's even worse. You've made those of us that defended you and went to bat for you risking getting banned by telling off @MACK E-6 and @Oscar the KW look like a bunch of douchebags.
     
  5. spyder7723

    spyder7723 Road Train Member

    15,470
    25,061
    Mar 31, 2013
    sarasota, fl
    0
    You and me both. I'm not doubting the guy, i just can't picture it. I've had many coil loads that made me use my snap binders in less than an ideal way, but beget with a ratchet binder. In fact coils are why i bought 8 ratchet binders and put 8 snap binders up in the barn.
     
    Airborne Thanks this.
  6. Razorwyr

    Razorwyr Road Train Member

    2,284
    2,824
    Jul 27, 2010
    Meridian, Mississippi
    0
    I've had a couple of situations where it was a little difficult to fit a ratchet binder on the chain between the product and the rail, but I've never found it impossible, just might have to route the chain a little different than initially planned
     
    Highway Sailor Thanks this.
  7. Highway Sailor

    Highway Sailor Road Train Member

    1,328
    1,659
    Nov 23, 2011
    Erie,Pa.
    0
    Next time it happens I will take a picture. But I will need your help to post it. I don't know how to attach pictures yet.
     
    MACK E-6 Thanks this.
  8. spyder7723

    spyder7723 Road Train Member

    15,470
    25,061
    Mar 31, 2013
    sarasota, fl
    0
    But a ratchet binder isn't any longer than a snap binder in the open position. You don't HAVE to open a ratchet all the way up. Just enough to have room to tighten down the product. Running out an inch at each end is usually good.
     
  9. MACK E-6

    MACK E-6 Moderator Staff Member

    48,755
    225,207
    Sep 19, 2005
    Baltimore, MD
    0
    No problem. Let me know when you're ready and I'll walk you through it.
     
  10. Highway Sailor

    Highway Sailor Road Train Member

    1,328
    1,659
    Nov 23, 2011
    Erie,Pa.
    0
    Well that's the thing. And when you have several coils chain routing becomes limited.
     
  11. Highway Sailor

    Highway Sailor Road Train Member

    1,328
    1,659
    Nov 23, 2011
    Erie,Pa.
    0
    Thanks
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.