Well Liebherr's website lists it at 101,450 without rope, 102,515 with optional telescopic undercarriage. It has a rope capacity of 1870 feet of rope per winch X 2.75 pounds per foot for a potential total of 10,285. That would put the machine at 111,785, so it might be about what it should weigh. I know most machines tend to be heavier than they're listed in my experience.
Big Loads - Post Photos Number 2
Discussion in 'Heavy Haul Trucking Forum' started by truckdad, Aug 3, 2015.
Page 444 of 867
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Logan76, PeteyFixAll, cke and 5 others Thank this.
-
1)Why are you surprised? It was on a boat, and they charge by the ton...ever seen a Cat scale for a boat? Oh right, cause the shipper said so.
2)What the heck are you complaining about? They put a fancy plywood cab cover on it. If you have ever had to try protecting the windows/cabs on those things you'd know better that to post that photo and then complain...
Ok, it was three questions, but one was rhetorical...
You could have just asked, I've got notes on three of them in Book of Knowledge, and they're all listed at 110&change...Ruthless, PeteyFixAll, skootertrashr6 and 6 others Thank this. -
This was the first one for me...
I feel so innocent - ndctyour going to tell me there is no tooth fairyRuthless, PeteyFixAll, skootertrashr6 and 5 others Thank this. -
cke, DDlighttruck, Razororange and 2 others Thank this.
-
Scrooge is real. He killed the tooth fairy..
He wanted 50 cents per tooth, the tooth fairy said going rate was 25 cents.
He got mad, called tooth fairy a rate cutter and eliminated the problem lolRuthless, PeteyFixAll, JDP and 8 others Thank this. -
Broker wants an empty scale
Ticket . I said I already know what I weigh empty.
Logan76, Ruthless, PeteyFixAll and 7 others Thank this. -
Well, me and the mutt are hitting the road for another 1800 mile deadhead to little falls, mn
Have to load for Fort Irwin on Friday.
@Heavy Hammer did I see you were passing through that way?Logan76, Oxbow, Razororange and 3 others Thank this. -
Couple Loads ive done
These next two are pieces of a drilling rig going onto a barge in Seattle
14 wide, 16 tall
14`6 wide 16`7 tall
Took this brake press to Phoenix.It was way to hott down there!!
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 444 of 867