Changed the fuel pressure/temperature sensor which had gotten rid of my stop engine fault issue but I’m still getting the ECU maintenance fault and when I get it I lose a lot of power....is this electrical? Also my truck just clicks and clicks several times before it will start. Are these issues related? Help I’m ready to burn this #####
2015 Volvo D13 ECU maintenance required
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by BrandyG23, Feb 27, 2018.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Clicking while trying to start sometimes is loose battery bolts. As in the nuts on the battery post. -
-
-
Ground posts? Starter to frame rail? Unbolt clean, tighten back down. Anywhere along the way that there’s a ground, inspect and clean
There’s a chance it could be the ecu, but I would definitely check all the cheaper but critical things first -
Hello Brandy,
I did a Google search and found this from Randy's post down below. He claims its a bad heater on the 02 sensor.
What is fault code SA 16 DTC P113713 for 2015 volvo truck - Fixya
https://www.dmv.de.gov/services/Vehicle_Services/dtc_list.pdfLast edited: Feb 28, 2018
-
-
KB3MMX Thanks this.
-
Volvo Heavy and Commercial Vehicle Fault Codes
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4