Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

No power. At a loss here. Losing hair.

Discussion in 'Volvo Forum' started by Amram, Mar 15, 2018.

Page 5 of 11
  1. Mar 15, 2018 #41
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    And I did not delete the EGR
     
    Amram, Mar 15, 2018
    Amram, Mar 15, 2018
    #41
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mar 15, 2018 #42
    d281833

    d281833 Heavy Load Member

    880
    918
    May 15, 2012
    0
    That's what I'm referring to, before the whole aftertreatment phase came into play it was possible to delete certain components with not a lot of consequence. What you've described is altering pretty much everything downstream.
     
    d281833, Mar 15, 2018
    d281833, Mar 15, 2018
    #42
    Justrucking2 Thanks this.
  4. Mar 15, 2018 #43
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    Well OTR is a huge operation and they have fleets of trucks running their deletes no problem. It seems mine is just being a #####. They are overnighting me a new delete kit with adjusted parameters to see if that resolves my low power issue. I think my turbo actuator is on it's way out the door cuz I have had a few instances before the delete where the truck refused to do rapid warm-up and times where descending a grade with the VEB (jake) on my boost would start bouncing causing the cab to buck and bronk until I turned the VEB off and turned it back on.
     
    Amram, Mar 15, 2018
    Amram, Mar 15, 2018
    #43
  5. Mar 15, 2018 #44
    Justrucking2

    Justrucking2 Road Train Member

    3,211
    4,291
    Sep 12, 2017
    Plymouth MI
    0
    Pull your DPF ad DOC cans, hollow them out, right to the sheet metal. You need that free flow. And buy a pyrometer and install.
     
    Justrucking2, Mar 15, 2018
    Justrucking2, Mar 15, 2018
    #44
  7. Mar 15, 2018 #45
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    Pre turbo or after turbo pyro? I installed pyros before on my deuce and a half when I put a 5 ton injector pump on and cranked the fuel up.
     

    Attached Files:

    Amram, Mar 15, 2018
    Amram, Mar 15, 2018
    #45
  8. Mar 16, 2018 #46
    Volvo8873

    Volvo8873 Light Load Member

    239
    144
    Apr 27, 2016
    Western Wisconsin
    0
    Just as justtrucking said you need to hollow out DPF AND DOC! Not one but both. Drilling holes don’t justify and can plug up.
     
    Volvo8873, Mar 16, 2018
    Volvo8873, Mar 16, 2018
    #46
    Amram Thanks this.
  9. Mar 16, 2018 #47
    Justrucking2

    Justrucking2 Road Train Member

    3,211
    4,291
    Sep 12, 2017
    Plymouth MI
    0
    I have my pyro probe mounted, clamped, on the exterior of the exhaust manifold at the #4 cylinder. You are looking for heat soak, the actual temp will be roughly 250 degrees more than what you are seeing on the gauge. That will give you a good idea of what is going on. If you are hitting 900 degree temps in normal driving conditions you are having real issues. My pyro runs right around 250 degrees in normal driving conditions in 30* weather. During the summer, 80* normal is right around 350-400* F
     
    Justrucking2, Mar 16, 2018
    Justrucking2, Mar 16, 2018
    #47
  10. Mar 16, 2018 #48
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    Will hollow out this weekend.
     
    Amram, Mar 16, 2018
    Amram, Mar 16, 2018
    #48
  11. Mar 16, 2018 #49
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    Got a link to pyro you use? On my deuce I use the Auberns digital pyrpmeter. It was the probe still that needs a hole drilled and tapped.
     
    Amram, Mar 16, 2018
    Amram, Mar 16, 2018
    #49
  12. Mar 16, 2018 #50
    Amram

    Amram Medium Load Member

    448
    234
    Feb 4, 2017
    0
    Oh. Oil temps last night running were 212 degrees while going 65mph on the I87 south with a stiff headwind
     
    Amram, Mar 16, 2018
    Amram, Mar 16, 2018
    #50
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 5 of 11